Polishing The Nail Surfaces (Attachment 3); Cleaning And Maintenance Of The Device - Silvercrest SNPS 1.5 A1 Bedienungsanleitung

6.6 Polishing the nail surfaces
(Attachment 3)
• After buffing, use attachment 3 (8) to polish the
nail surfaces.
• Move attachment 3 (8) over the nail surface in
small circles while applying gentle pressure.
Thus, the nails are provided with a natural
shine.
7. Cleaning and maintenance
of the device
WARNING! Risk of material damage!
Do not use any astringent or abrasive cleaning
agents.
Except for the protective lid 1, no part may be
cleaned under water.
• After use, wipe off the electric nail file 4 and
the attachments 8, using a lightly moistened
cloth.
• Check regularly if the grinding surfaces of the
attachments 8 are damaged or worn. Attach-
ments can be reordered. (See "How to order
additional attachments" on page 61.)
• The protective lid 1 can be cleaned under run-
ning water.
58
GB