Connecting Euroblock Plugs; Specifications; Input And Output Connectors; Other - Tascam BO-32DE Bedienungsanleitung

Connecting Euroblock plugs

1.
Loosen the Euroblock plug terminal screws.
2.
Insert wires.
3.
Tighten the Euroblock plug terminal screws.
4.
Use an included wire band to attach the wires to the tab.
Euroblock plug wiring example
8
TASCAM BO-32DE / BO-16DX/IN / BO-16DX/OUT

Specifications

Input and output connectors

BO-32DE

Front panel
connectors:
Euroblock (balanced) 3.81mm pitch × 16 (32 channels)
Rear panel
connectors: D-sub 25pin female x4
Attachment screws: No.4-40 UNC (inch-type) × 8

BO-16DX/IN

Front panel
connectors: XLR-3-31 (1: GND, 2: HOT, 3: COLD) x16
Rear panel
connectors: D-sub 25pin female x2
Attachment screws: No.4-40 UNC (inch-type) × 4

BO-16DX/OUT

Front panel
connectors: XLR-3-32 (1: GND, 2: HOT, 3: COLD) x16
Rear panel
connectors: D-sub 25pin female x2
Attachment screws: No.4-40 UNC (inch-type) × 4

Other

Dimensions (width × height × depth)
482.6 × 44.1 × 50.8 mm (BO-32DE)
482.6 × 44.1 × 54.5 mm (BO-16DX/IN)
482.6 × 44.1 × 51.5 mm (BO-16DX/OUT)
Weight
0.9 kg (BO-32DE)
0.9 kg (BO-16DX/IN)
0.9 kg (BO-16DX/OUT)
0 See the back of this manual for dimensional drawings.
0 Illustrations in this manual might differ in part from the actual
product.
0 Specifications and external appearance might be changed
without notification to improve the product.