Battery Level And Charging - DJI OcuSync 2.0 Kurzanleitung

1. Battery Level and Charging

Press the power button once to check
the battery level.
Press and hold for two seconds or
press for a few seconds to power on
the Smart Controller.
It takes about two hours to fully charge the Smart
Controller using the standard USB power adapter.
Power Outlet
100~240 V Power Adapter
• Please use the official USB power adapter to charge the Smart Controller. When a
standard USB power adapter is not available, it is recommended to use an FCC/
CE certified USB power adapter rated 12V/2A.
• Please recharge the battery at least every three months to prevent over
discharging - the battery will deplete when stored for an extended period.
① Please refer to the Specifications for details on supported aircraft.
② The Smart Controller can reach its maximum transmission distance (FCC) in a wide open area with
no electromagnetic interference using a MAVIC
③ The maximum working time was tested in a lab environment and is for reference only.
④ A pair of sticks are stocked in the Sticks Storage Slot before delivery. In the illustrations used in the
overview section, the sticks have already been mounted on the Smart Controller.
USB USB-C Cable
Low
TM 2 at an altitude of about 100 meters.
Battery High
5