Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting
Installation shall only be performed by qualified personnel and in accordance with
Note:
local governing regulations.
•
Mount the transducer so that it is above the maximum material level by at least the
blanking value. Refer to the associated controller manual.
•
On liquid applications, the transducer must be mounted so that the axis of transmission is
perpendicular to the liquid surface.
•
On solids applications, use a Siemens Milltronics Easy Aimer to aim the transducer.
•
Secure installation by connecting a safety chain from the transducer to a structural
member.
•
Consider the optional temperature sensor when mounting the transducer.
Wear proper ear protection in the vicinity of the operating transducer.
Caution:
The XLT 60 transducers could emit hazardous sound pressure. They shall be installed
in such a manner that the sound pressure will be reduced to a non-hazardous level.
Solids Applications
Easy Aimer configurations are not suitable for pressure applications.
WARNING:
A5E32280448
XLT Series Transducers - OPERATING MANUAL
Easy Aimer
(typical model)
to nearest earth/ground
safety chain
earth/ground connection
Page EN-7
Werbung
Inhaltsverzeichnis
