Siemens XLT-30 Betriebsanleitung Seite 6

• The certification of the XLT range of transducers relies upon the use of following materials
in the construction:
Enclosure: Aluminum
Encapsulant: Durapot 861-F3 / 864
WARNING:
substances, then it is the responsibility of the user to take suitable precautions
that prevent it from being adversely affected, thus ensuring that the type of
protection is not compromised.
Aggressive Substances: acidic liquids or gases that may attack metals or solvents that may
Suitable Precautions:
For manual override, use the disconnect switch provided in the building installation of the
associated controller.
XLT Series Product Marking
Max. Input Current: 44.2 mA r.m.s.
Max. Input Voltage: 1.77 V r.m.s.; 250 Vp
KCC-REM-S49
Echomax
WARNING:
(7/23/EC and is not intended for use as a safety device.
Page EN-4 XLT Series Transducers - OPERATING MANUAL
If the equipment is likely to come into contact with aggressive
affect polymeric materials.
regular checks as part of routine inspections or establishing from
the material's data sheet that it is resistant to specific chemicals.
XLT-xx
ULTRASONIC TRANSDUCER
Serial No.: GYZ / V1034567
Type: FLEXURAL MODE
Enclosure: IP68
Amb. Temp.: – 40°C to 150°C
Ex mb IIC T3 Gb
Ex tb IIIC T200 °C Db
DNV 12.0076 X
OCP 0017
Siemens Milltronics Process Instruments, Peterborough
Assembled in Canada with domestic
and imported parts
This product is designated as a Pressure Accessory per Directive
Class I, Div 1,
Gr. A, B, C, D
R
Class II, Gr. E, F, G
TEMP. CODE: T3C
PER DWG # 0-8830004Z-DI-A
Class I, Div 2, Gr. A, B, C, D
Class II, Div 2, Gr. F, G
PER DWG # 0-9650016Z-DI-A
II 2 G 1D T3
II 2 GD T3
EEx m I I T3
0518
SIRA 01ATEX5294X
A5E32280448