User Interface - DAB E.sylink Installationsanleitung

otherwise contact a DAB assistance centre (www.dabpumps.com).

3- USER INTERFACE

Figure 5: e.sylink Interface
On the e.sylink there are leds indicating the system operating status.
Table 4 describes the meaning of each leds on the user interface:
Characteristics of the leds
LEDS COLOUR
POWER
White
FAULT
Red
Description
On: e.sylink powered
Off: e.sylink not powered
Off: no fault
On or blinking: see Table 5
IN Green
OUT Yellow
Blue
Green
Table 4: leds characteristics
Table 5 described the possible faults that may be found by e.sylink
Fault
General
Supply voltage not sufficient
for correct relay control
Supply voltage not sufficient to
power the pressure sensor
Wireless protocol version not
compatible.
Table 5: Faults
ENGLISH
Off: Input not energised
On: Input energised
Off: relay contact open
On: relay contact closed
Off: e.sylink not connected
and wireless configuration
not present
On: e.sylink connected
Blinking: e.sylink not
connected, but with wireless
configuration present
Pressure Sensor connected
LED FAULT
On with fixed light
3 blinks every 4 seconds
2 blinks every 4 seconds
1 blink every 4 seconds
GB
15