Defrost Function - Ugur UPR 1 Bedienungsanleitung

D- USING YOUR PASTRY DISPLAY
Loading foodstuff to your cooler
When your product reaches to the desired temperature at empty state, you can load it with the types
of foodstuff with the examples given in this manual. (If your product is a thermometer installed model,
you can control internal temperature of your product from here.)
CAUTION!
Before loading your cooler with foodstuff to your pastry display, run it empty for two
(2) hours.
• Do not place products that are dangerous to be cooled down into your cooler. Do not defrost
frozen products in your cooler.
• Shelf carrying capacity of all models is 10 kg

Defrost function

Your product has automatic defrost function which runs in every 8 hours
Although your product automatically prevents frost deposit, frost deposit ratio may increase due to
high temperature and humidity as well as frequent use of the device. Running period increases as the
frost deposit increases. That also increases the energy consumption. In such cases, stop your device
and ensure melting of the frost.
REMEMBER!
An evaporator without frost deposit will always works with higher efficiency.
Water flowing from the evaporator comes to the drip tray at compressor section. Although the hot
gas pipe evaporates this water here, it is necessary to check and clean this part at least once a month.
41
EN