D- Using Your Pastry Display; Start-Up - Ugur UPR 1 Bedienungsanleitung

D- USING YOUR PASTRY DISPLAY

Start-up

WARNING!
• This operating manual applies for various device models. Hardware scopes of the models may
vary. There may be differences in the pictures.
• Clean inside and all accessories of your product before the first start up. (see page ...).
• If your product has been shaken so much during the transportation and positioning, wait for
one (1) hour without running it. Thus, the compressor oil, which may enter into the system, will
return back. You may damage the compressor if you run it without considering this.
• Insert your product's plug into an outlet with alternative current of 220-240V/50 Hz only, which
has been installed according to the regulations. (Picture 13)
• Initiate cooling operation of your product by pressing the button seen in Picture 2. While
you product is running, you may hear a slight fan and compressor sound. Take the 0-1 switch
shown in picture 2 to position 1 in order to turn on the lights or ensuring rotation
PICTURE 14 PICTURE 14
39
PICTURE 15
EN