Technical Data - Beper BP.580 Betriebsanleitung

EN
Electric Coffee Grinder Use instructions
CLEANING:
Be sure to unplug the appliance and make it cool down completely before cleaning.
Disassemble the removable parts from the body by following the operation mentioned above:
a) Remove bean hopper lid
b) Remove bean hopper
c) Remove ground coffee container
d) Remove the ground coffee container lid
rinse them with water and neutral soap and dry them thoroughly.Do not use abrasive detergents or cloth, that
could damage the appliance.
Lift the handle of removable grinder and then rotate it anticlockwise to remove the grinder. Use the equipped
brush to clean the grinder, or clean it with water and then dry it thoroughly before replace in position.
Attention: Please operate carefully as the removable grinder and grinding blade are sharp.
To replace the removable grinder in its position , put it into the grinding chamber by making the groove on the
removable grinder align with the tab on the grinding chamber, and then rotate the grinder clockwise until it is
fixed well in postion.
Wipe the body, the cord and the plug with lightly damp cloth and then dry it completely.
Never immerse the body in water or other liquids.
Make sure the appliance and accessories are dry before using them again and/or storing.

TECHNICAL DATA:

Power: 150W
Power supply: 220-240V~ 50-60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
11