Effect Parameters - Pioneer DJM-909 Bedienungsanleitung

EFFECT FUNCTIONS

Effect Parameters

The 50 built-in effects can be modified by parameters for time and amount to produce a wider variety of effects. Operate the TIME/
SELECT dial to adjust time parameters (parameter 1), and use the MIX/DEPTH dial to adjust amount parameters (parameter 2).
Also with fader effects, the position of the fader lever can be used to produce changes resulting in an even wider range of effects.
7 Beat effects
No. Name
1 DELAY (*1)
2 ECHO (*1)
3 PAN ECHO (*1)
4 PITCH ECHO (*1)
5 REVERSE DELAY (*1)
6 DUCKING ECHO (*1)
7 ROLL (*2)
8 HOLD ECHO (*1) (*2)
9 MULTI TAP DELAY (*1)
10 RAIN (*1)
11 REVERB1 (*1)
12 REVERB2 (*1)
13 REVERB3 (*1)
14 PITCH SHIFTER1
15 PITCH SHIFTER2
16 PAN
17 TRANS
18 RHYTHM TRANS
19 TRANS PAN
20 TREMOLO
21 VIBRATO
22 CHORUS1
23 CHORUS2
24 CHORUS3
25 FLANGER1
40 40
<DRB1350> <DRB1350>
En En/Fr
Parameter 1 (TIME/SELECT dial)
Explanation
Set delay time.
Set delay time.
Set delay time.
Set delay time.
Set delay time.
Set delay time.
Set effect time.
Set delay time.
Set effect time.
Set effect time.
Reverberation time
Reverberation time
Delay time
Set pitch to be changed.
Set type of harmonization.
Set effect time.
Set effect time.
Set effect time.
Set effect time.
Fine setting of modulation
period.
Fine setting of modulation
period.
Set period of chorus modulation.
Set period of chorus modulation.
Set period of chorus modulation.
Set period of flange effect
frequency shift.
Setting range (unit)
1 – 10000 (msec) Set balance between source and delay
sounds.
1 – 10000 (msec) Set balance between source and echo
sounds.
1 – 10000 (msec) Set balance between source and echo
sounds.
40 – 10000 (msec) Set balance between source and echo
sounds.
10 – 10000 (msec) Set balance between source and delay
sounds.
1 – 10000 (msec) Set balance between source and echo
sounds.
No effect sounds will be heard if the input
sounds are above a certain level even when
the dial is rotated fully to the right.
10 – 10000 (msec) Set balance between source and ROLL
sounds.
2 – 10000 (msec) Set balance between source and echo
sounds.
8 – 1200 (msec) Set balance between source and delay
sounds.
40 – 10000 (msec) Rotate to right to increase effect.
10 – 200 (%) Change amount of reverberation.
10 – 200 (%) Change amount of reverberation.
10 – 5000 (msec) Change volume of echo sound + reverb sound.
–100 to +100 (%) Set balance between source and pitch-shifted
sounds.
1 – 5 Set balance between source and pitch-shifted
sounds.
10 – 16000 (msec) Set balance between source and effect
sounds.
10 – 16000 (msec) Set balance between source and effect
sounds.
10 – 8000 (msec) Set balance between source and effect
sounds.
10 – 2000 (msec) Set balance between source and effect
sounds.
10 – 16000 (msec) Change the sound volume waver.
1 – 16000 (msec) Change the frequency waver.
10 – 32000 (msec) Change the chorus sound volume.
10 – 32000 (msec) Change the chorus sound volume.
10 – 32000 (msec) Change the chorus sound volume.
10 – 32000 (msec) Rotate to right for stronger effect.
Parameter 2 (MIX/DEPTH dial)
Explanation