Pioneer DJM-909 Bedienungsanleitung Seite 42

EFFECT FUNCTIONS
7 Fader effects
No. Name
36 FADER ROLL (*2)
37 FADER MULTI TAP
DELAY (*1)
38 FADER TRANS PAN
39 FADER PITCH SHIFTER
40 FADER RING
41 FADER VOCODER1
42 FADER VOCODER2
43 FADER FILTER (LPF)
44 FADER FILTER (HPF)
45 FADER FILTER (BPF)
46 FADER FLANGER
47 FADER PHASER
48 FADER SYNTHE1
49 FADER SYNTHE2
50 FADER SYNTHE3
(*1) When the channel fader or cross fader is used to lowering sound volume, no effect sounds will be heard, even if monitor
SELECT switch is set to the [EFFECT] position.
(*2) When EFFECT switch is turned OFF, no effect sounds will be heard even if the monitor SELECT switch is set to the [EFFECT]
position.
42 42
<DRB1350> <DRB1350>
En/Fr En
Parameter 1 (TIME/SELECT dial)
Explanation Setting range (unit)
Set reference 40 – 10000 (msec)
ROLL time
Set reference 8 – 1200 (msec)
effect time
Set reference 40 – 2000 (msec)
effect time.
Set type of pitch 1 – 3
change.
Change 500 – 8000 (Hz)
fundamental
frequency of
effect sound.
Set sensitivity 1 – 100 (%)
corresponding to
input volume
— —
— —
— —
— —
— —
Base frequency 40 – 23999 (Hz)
Base frequency 40 – 23899 (Hz)
Base frequency 40 – 23899 (Hz)
Parameter 2 (MIX/DEPTH dial)
Explanation
Set balance between source and
ROLL sounds.
Set balance between source and
delay sounds.
Set balance between source and
effect sounds.
Set balance between source and
pitch-shifted sounds.
Change effect sound level.
Adjust volume of code selected on
panel menu.
Rotate to right for increased
resonance and more unusual
sound.
Rotate to right for increased
resonance and more unusual
sound.
Rotate to right for increased
resonance and more unusual
sound.
Rotate to right for increased effect.
Rotate to right for increased effect.
Left half changes volume, right half
changes volume of the set frequency.
Left half changes volume, right half
changes volume of neighboring
frequency.
Left half changes volume, right half
changes volume of neighboring
frequency.
Fader lever
Explanation
Change roll time
Change reference
beat time.
Change cut time
Change pitch of
input sound.
Change frequency
of effect sound
Change fundamental
frequency of
oscillating sound.
Changes cutoff
frequency of low-
pass filter.
Changes cutoff
frequency of high-
pass filter.
Changes band-pass
filter's center
frequency.
Changes frequency
band subject to
flange effect.
Changes frequency
band subject to
phase effect.
Changes to stair-
stepped sound.
Changes to stair-
stepped sound.
Changes to stair-
stepped sound.