Silvercrest SEKU 2000 A1 Bedienungsanleitung Seite 74

Assembly
Step 7
Screw the 6 single locking pins
♦
support frame plates.
Place the 6 adapter sleeves
♦
Thereby, line up the adaptor sleeves
points to the outer edge.
Then, bring all of the plates together so that the single locking pins
♦
support frame plates.
When done, screw all adapter sleeves
♦
are clamped into the adapter sleeves
Step 8
Take the support frame
♦
Then place the support frame
♦
fl oor plate.
SEKU 2000 A1
with a screwdriver into the holes provided on the front and rear
D
in the large pre-drilled holes in the three middle support frame plates.
E
E
E
D
and insert 3 wood plugs
6
on the fl oor plate
6
Rear view
6
B
B
7
with the screwdriver so that the arrow on the adaptor sleeves
to the right with the screwdriver until the single locking pins
E
and the panels are seated fi rmly together and at right angles.
E
D
into the holes of the front plate underside.
B
so that the 3 wood plugs fi t into the 3 holes in the
7
engage the holes in the middle
D
E
Front View
D
GB
MT
73