User Manual; Safety Instructions; General Guidelines - Velleman CAMSCC17 Bedienungsanleitung

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that
disposal of the device after its lifecycle could harm the
environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be
returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual
thoroughly before bringing this device into service. If the device was
damaged in transit, don't install or use it and contact your dealer.
2.

Safety Instructions

For indoor use only. Keep this device away from rain,
moisture, splashing and dripping liquids.
Keep the device away from children and unauthorised users.
There are no user-serviceable parts inside the device. Refer
to an authorized dealer for service and/or spare parts.
• Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
• Note that damage caused by user modifications to the device is
not covered by the warranty.
3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the
last pages of this manual.
• Protect this device from shocks and abuse. Avoid brute force when
operating.
• Protect the device against extreme heat, dust and moisture.
• Familiarise yourself with the functions of the device before actually
using it.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
4. Features
• Low light sensitivity of 0.3 Lux at F2.0
• Built-in microphone
• Optional lenses (not incl.): CAML1B, CAML1BZ, CAML2B, CAML3B,
CAML8B, CAML9B, CAML13, CAML14, CAML15, CAML16, CAML17,
CAML18, CAML19, CAML20Z, CAML21Z.
5. Overview
Refer to the drawings on page 2 of this manual.
•
[A] Flange adjustment ring, suitable for CS-mount lenses.
•
[B] Back focal lock screw. The camera is set at the standard back
focal position. Depending on the type of used lens, slight adjustment
may be necessary. Adjust the lens back-focus by turning the
focusing knob. Use the included socket head wrench for this.
•
[C] Auto iris lens connector. Supply power and control signals to
the auto iris lens.
•
[D] Direct Drive Level Adjustment. When using a Direct Drive
Lens, the Direct Drive Level for video output brightness can be
adjusted.
12/05/2010
CAMSCC17

USER MANUAL

3
®
©Velleman nv