Troubleshooting - Kessel Staufix Anleitung

8

Troubleshooting

All work exceeding the activities described in the Betrieb chapter may only be carried out by
skilled personnel (see 3.2).
• Follow the instructions described in 7.1 and carry out if necessary
Fault messages on the control unit
LED
Red, flashing
Red, flashing 2x *
* every 20 seconds
016-023
Troubleshooting
Acoustic Meaning / fault elimination (see chapter)
signal
yes Battery voltage too low / replace battery (7.4.1)
yes Humidity in the control unit housing / remove control unit,
if this eliminates the fault, install again and carry out a
functional check (5.3). If the fault persists: inform KESSEL
Factory Customer Service or replace the lockable cover with
control unit
59 / 180