Powerdvd - Panasonic CF-VDRRT3W Bedienungsanleitung

PowerDVD

PowerDVD is a software application for DVD-Video playback.
Here, you will find explanations and general information on the installation procedure and
how to access the online manual.
Refer to the online manual concerning the detailed use of the software application (
page 24) .
Running PowerDVD
Be sure to log on to the computer with an administrator authority.
E
When PowerDVD is started up for the first time, the [Key Activation] screen will appear.
Input the serial number (CD Key) found on the utility disc case, and select [Activate].
Then select
If the [PowerDVD has detected that your computer is a notebook] message appears, select
[Cancel]. (This message will appear three times after the initial startup.)
Windows XP
Select [start] - [All Programs] - [CyberLink PowerDVD] - [CyberLink PowerDVD] or select
on the desktop.
Windows 2000
Select [Start] - [Programs] - [CyberLink PowerDVD] - [CyberLink PowerDVD] or select
on the desktop.
Usage Precautions
Do not enter the standby or hibernation mode, or switch the display by pressing [Fn] +
[F3] while PowerDVD is running.
Do not start PowerDVD while the hard disk drive indicator is blinking immediately after
the computer was started up.
If you maximize the video display window, you can return to the original window size by
double-clicking over the images.
During video playback, do not perform the following.
• Ejecting the disc
• Using other applications or the Command Prompt
• Changing the settings of the screen properties
Immediately after resuming from a pause, frame dropping may occur depending on the
operating environment or DVD-Video (images or sounds are disrupted).
In the Extended Desktop or simultaneous (internal/external) display mode, there are times
when images or video are not displayed correctly.
22
, and proceed with the user registration.