Connections To The Computer - Panasonic CF-VDRRT3W Bedienungsanleitung

Connections to the Computer

Connection
3
(Example of connections)
2
NOTE
The drive's on/off power operations are coupled to the computer so that when the
computer is turned on or off, the drive will be automatically turned on or off.
The drive's power is automatically turned on or off by connecting or disconnect-
ing the interface cable.
CAUTION
Do not connect any other cable in place of the interface cable which is supplied
with the drive. Doing so may damage the drive and/or computer.
Connect the drive directly to the computer. No guarantees can be made for the op-
eration if it is connected via a USB hub.
The disc cover will not be locked in place even if an attempt is made to close the disc
cover while it remains ajar. In a case like this, open it up all the way, and then close
it.
When using this drive with USB bus power, we recommend using this drive alone
(other than PCMCIA Card, USB mouse, USB keyboard, etc.).
1 Turn your computer on.
1
2 Connect the end of the interface
3 Connect the end of the interface
cable (included) with the smaller
of the two plugs to the drive's
interface connector.
cable with the larger of the two
plugs to the computer's USB port.
The drive's power is now turned on
automatically, and the indicator lights up
in green.
E
11