Sony HDLA1500 Handbuch Seite 37

r VF (viewfinder) SCAN switch
Used to control the viewfinder screen display.
16:9: To set the viewfinder display to the 16:9 aspect ratio.
4:3: To set the viewfinder display to the 4:3 aspect ratio.
Note
This switch is enabled on the HDVF-700A only.
s MIX VF (mixture viewfinder) switch
You can see the mixed signal of the camera's output signal
and the return video signal on the viewfinder screen.
ON: This function is enabled. You can see the mixed signal
of the camera's output signal and the selected return
video signal on the viewfinder screen when you press
the RET 1 or RET 2 button.
OFF: This function is disabled.
t SCREEN SIZE MARKER switch
Used to control the display of the screen size marker as
follows:
ON ( ): Areas outside the specified ratio area will be
darkened.
ON ( ): The screen size marker (white lines) will be
displayed.
OFF: The screen size marker will not be displayed.
u MARKER switch
Used to control the display of the marker as follows:
ON: A marker selected from the menu will be displayed on
the viewfinder screen.
OFF: The marker will not be displayed.
v UP TALLY switch [1500][1505]
Set whether or not the camera's Up Tally lamp and the
lens' tally lamp will light when the camera receives a red
tally signal.
ON: The tally lamps will light.
OFF: The tally lamps will not light.
w DISPLAY switch
The functions of the DISPLAY switch are as follows:
ON: Text and messages describing the camera settings and
operating status may be displayed on the viewfinder
screen.
OFF: Status messages will not appear on the viewfinder
screen.
MENU: Menus for camera settings will be displayed on
the viewfinder screen.
x MENU switch and control
Use the control to select camera's menu items or change
setting values in the menus displayed on the viewfinder
screen.
The functions of the switch are as follows:
ENTER: Confirm the camera's menu or page selected
using the MENU control, or confirm setting values.
CANCEL: Cancel menu setting values or return to the
previous menu page.
y ASSIGNABLE switch
A function can be assigned with a camera menu operation.
Locations and Functions of Parts
37