Sony HDLA1500 Handbuch Seite 33

HDLA1507
c Holder for camera
number plate
d Cable clamp
a Tally lamp [1500][1505]
The lamp lights when a red tally signal is supplied to the
mounted camera.
To display the camera number, attach the supplied number
plate for up tally or select the desired number on the menu
of the camera.
b Camera handle catch [1500][1505]
To hold the camera handle when the viewfinder is to be
shifted toward the front.
For details, see "To adjust the viewfinder position" on
page 43.
c Holder for camera number plate
Attach a number plate for side panel (supplied) to display
the camera number.
For details, see "Attaching the Number Plates" on page
45.
d Cable clamp
Used to secure the camera cable.
e DC OUT connector (4-pin)
To supply power (12 V, max. 1.5 A) to the script light of
the BKP-7911 Script Holder.
f Accessory bracket
Used to secure optional accessories such as the BKP-7911
Script Holder.
For more information on attaching an accessory, see the
accessory's operation manual.
Viewfinder table (page 42)
Viewfinder table lock lever
(opposite side)
Viewfinder table release
knob
Rear panel lock release
lever
e DC OUT connector
DC OUT
12V 1.5A
f Accessory bracket
Locations and Functions of Parts
33