Installing Windows - ASROCK P4VM890 Bedienungsanleitung

2.10 2.10 AMR Card and Driver Installation 2.10 AMR Card and Driver Installation AMR Card and Driver Installation AMR Card and Driver Installation
2.10 2.10 AMR Card and Driver Installation
If you do not insert AMR card to this motherboard, and you finish installing all
drivers to your system now, but in the future, you plan to use AMR card function
on this motherboard, please follow the steps below then.
1. Insert AMR card to AMR slot on this motherboard. Please make sure that the
AMR card is completely seated on the slot.
2. Install AMR card driver from our support CD to your system.
3. Reboot your system.
2.11

2.11 Installing Windows

2.11 Installing Windows Installing Windows Installing Windows
2.11 2.11 Installing Windows
If you want to install Windows
HDDs with RAID functions, please follow below steps.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA driver diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.
C. When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
press any key to start
Please insert a floppy diskette into the floppy drive, and press any key.
E. The system will start to format the floppy diskette and copy SATA drivers
into the floppy diskette.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the
document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
After step1, 2, 3, you can start to install Windows
system. At the beginning of Windows
driver. When prompted, insert the SATA driver diskette containing the VIA
driver. After reading the floppy disk, the driver will be presented. Select the driver to
install according to the mode you choose and the OS you install.
ASRock P4VM890 Motherboard
2000 / XP With RAID Functions 2000 / XP With RAID Functions 2000 / XP With RAID Functions
2000 / XP With RAID Functions 2000 / XP With RAID Functions
®
® 2000 / Windows ® XP OS on your SATA
Advanced screen
®
2000 / XP OS on your system.
® 2000 / Windows
® setup, press F6 to install a third-party RAID
IDE Configuration.
® XP OS on your
®
RAID
1 7 1 7 1 7 1 7 1 7