ASROCK P4VM890 Bedienungsanleitung Seite 14

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Header
(9-pin USB67)
(see p.2, No. 16)
Shared USB 2.0 Header
(9-pin USB4_5)
(see p.2, No. 28)
Infrared Module Header
(5-pin IR1)
(see p.2, No. 6)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.2, No. 23)
(AUX1: see p.2, No. 22)
Front Panel Audio Header
(8-pin AUDIO1)
(see p.2, No. 20)
1 4 1 4 1 4 1 4 1 4
connect to the
power supply
CD1
AUX1
ASRock P4VM890 Motherboard
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
Besides six default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports. The shared USB 2.0
header (USB4_5) is shared with
USB ports 45 on the I/O panel.
When using the front panel USB
ports by attaching the front panel
USB cable to USB4_5 header,
the USB ports 45 on the I/O panel
will not be able to function.
This header supports an optional
wireless transmitting and
receiving infrared module.
These connectors allow you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for the front
panel audio cable that allows
convenient connection and
control of audio devices.