Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 42
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2007 ASRock INC. All rights reserved.
ASRock P4VM900-SATA2 Motherboard
Published August 2007
1 1 1 1 1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK P4VM900-SATA2

  • Seite 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Seite 2 PCI Express x16 Slot (PCIE1) North Bridge Controller ATX Power Connector (ATXPWR1) South Bridge Controller Shared USB 2.0 Header (USB4_5, Blue) Primary Serial ATA II Connector (SATAII_1) CPU Fan Connector (CPU_FAN1) Secondary Serial ATAII Connector (SATAII_2) 2 2 2 2 2 ASRock P4VM900-SATA2 Motherboard...
  • Seite 3 ASRock 6CH I/O Plus ASRock 6CH I/O Plus ASRock 6CH I/O Plus ASRock 6CH I/O Plus ASRock 6CH I/O Plus PS/2 Mouse Port (Green) Microphone (Pink) Parallel Port Shared USB 2.0 Ports (USB45) USB 2.0 Ports (USB23) USB 2.0 Ports (USB01)
  • Seite 4: Package Contents

    In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com If you require technical support related to this motherboard, please visit our website for specific information about the model you are using.
  • Seite 5: Specifications

    - Support DDR400/333 - Max. capacity: 4GB (see CAUTION 3) Hybrid Booster - CPU Frequency Stepless Control (see CAUTION 4) - ASRock U-COP (see CAUTION 5) - Boot Failure Guard (B.F.G.) Expansion Slot - 1 x PCI Express x16 slot...
  • Seite 6 Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking. 6 6 6 6 6 ASRock P4VM900-SATA2 Motherboard...
  • Seite 7 As long as we have the latest driver, we will update it to our website in the future. Please visit our website for Microsoft ® Windows ® Vista driver and related information. ASRock website http://www.asrock.com 7 7 7 7 7 ASRock P4VM900-SATA2 Motherboard...
  • Seite 8 VGA to 64MB. If you use onboard VGA with total system memory size above 512MB and plan to submit Windows ® Vista Basic logo, please adjust the shared memory size of onboard VGA to 128MB or above. 8 8 8 8 8 ASRock P4VM900-SATA2 Motherboard...
  • Seite 9 Installation Installation Installation P4VM900-SATA2 is a Micro ATX form factor (9.6-in x 8.0-in, 24.4 cm x 20.3 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions...
  • Seite 10: Cpu Installation

    Then connect the CPU fan to the CPU_FAN connector (CPU_FAN1, see p.2 No. 27). For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink. ASRock P4VM900-SATA2 Motherboard...
  • Seite 11 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) P4VM900-SATA2 motherboard provides two 184-pin DDR (Double Data Rate) DIMM slots. Please make sure to disconnect power supply before adding or removing DIMMs or the system components.
  • Seite 12: Installing An Expansion Card

    Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Step 5. Fasten the card to the chassis with screws. Step 6. Replace the system cover. ASRock P4VM900-SATA2 Motherboard...
  • Seite 13 To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short 2 pins on CLRCMOS1 for 5 seconds. ASRock P4VM900-SATA2 Motherboard...
  • Seite 14 SATAII interface allows up to 3.0 Gb/s data transfer rate. Serial ATA (SATA) Either end of the SATA data cable Data Cable can be connected to the SATA / SATAII hard disk or the SATAII (Optional) connector on the motherboard. ASRock P4VM900-SATA2 Motherboard...
  • Seite 15 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. ASRock P4VM900-SATA2 Motherboard...
  • Seite 16 (see p.2, No. 18) ground pin. CPU Fan Connector Please connect the CPU fan cable to this connector and (3-pin CPU_FAN1) match the black wire to the (see p.2, No. 27) ground pin. ASRock P4VM900-SATA2 Motherboard...
  • Seite 17 Failing to do so will cause the failure to power up. Please install the heatsink and the CPU fan before installing ATX 12V connector; otherwise, it may cause permanent damage! ASRock P4VM900-SATA2 Motherboard...
  • Seite 18 Please visit HITACHI’s website for details: http://www.hitachigst.com/hdd/support/download.htm The above examples are just for your reference. For different SATAII hard disk products of different vendors, the jumper pin setting methods may not be the same. Please visit the vendors’ website for the updates. ASRock P4VM900-SATA2 Motherboard...
  • Seite 19 HDDs HDDs HDDs HDDs HDDs P4VM900-SATA2 motherboard supports Hot Plug and Hot Swap functions for SATA / SATAII Devices. NOTE What is Hot Plug Function? If the SATA / SATAII HDDs are NOT set for RAID configuration, it is called “Hot Plug”...
  • Seite 20: Installing Windows

    Set the “SATA Operation Mode” option to [RAID]. STEP 2: Make a SATA / SATAII driver diskette. Insert the ASRock Support CD into your optical drive to boot your system. During POST at the beginning of system boot-up, press <F11> key, and then a window for boot devices selection appears.
  • Seite 21 Vista OS on your system. When you see “Where do you want to install Windows?” page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the ASRock P4VM900-SATA2 Motherboard...
  • Seite 22 PCI / PCIE bus is in the fixed mode so that FSB can operate under a more stable overclocking environment. Please refer to the warning on page 6 for the possible overclocking risk before you apply Untied Overclocking Technology. ASRock P4VM900-SATA2 Motherboard...
  • Seite 23 Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus. ASRock P4VM900-SATA2 Motherboard...
  • Seite 24 ASRock P4VM900-SATA2 Motherboard...
  • Seite 25 ® ® ® ® ® ® ® ® ASRock P4VM900-SATA2 Motherboard...
  • Seite 26 ® ® ASRock P4VM900-SATA2 Motherboard...
  • Seite 27 ® ® ® ® ® ® ® ASRock P4VM900-SATA2 Motherboard...
  • Seite 28 ® ® ® ® ® ASRock P4VM900-SATA2 Motherboard...
  • Seite 29 ASRock P4VM900-SATA2 Motherboard...
  • Seite 30 9 0 ° 90° ® ® ® ASRock P4VM900-SATA2 Motherboard...
  • Seite 31 ASRock P4VM900-SATA2 Motherboard...
  • Seite 32 ASRock P4VM900-SATA2 Motherboard...
  • Seite 33 ASRock P4VM900-SATA2 Motherboard...
  • Seite 34 “ ” SA T AII_2 SA T AII_1 ASRock P4VM900-SATA2 Motherboard...
  • Seite 35 ASRock P4VM900-SATA2 Motherboard...
  • Seite 36 ® ® ASRock P4VM900-SATA2 Motherboard...
  • Seite 37 ASRock P4VM900-SATA2 Motherboard...
  • Seite 38 ® ASRock P4VM900-SATA2 Motherboard...
  • Seite 39 ® ® ® ® ® ® ASRock P4VM900-SATA2 Motherboard...
  • Seite 40 ® ® ASRock P4VM900-SATA2 Motherboard...
  • Seite 41 ASRock P4VM900-SATA2 Motherboard...
  • Seite 42 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock P4VM900-SATA2 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Seite 43: Spezifikationen

    - 2 x Steckplätze für DDR - Unterstützt DDR400/333 - Max. 4GB (siehe VORSICHT 3) Hybrid Booster - Schrittloser CPU-Frequenz-Kontrolle (siehe VORSICHT 4) - ASRock U-COP (siehe VORSICHT 5) - Boot Failure Guard (B.F.G. – Systemstartfehlerschutz) Erweiterungs- - 1x PCI Express x16 -Steckplätze steckplätze - 3 x PCI -Steckplätze...
  • Seite 44 Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen. Es geschieht dann auf eigene Gefahr und auf Ihre Kosten. Wir übernehmen keine Verantwortung für mögliche Schäden, die aufgrund von Overclocking verursacht wurden. ASRock P4VM900-SATA2 Motherboard...
  • Seite 45 Vista Treiber wird ständig aktualisiert. Sobald wir den neuesten Treiber haben, stellen wir ihn auf unserer Website zur Verfügung. Bitte besuchen Sie unsere Website für den ® ® Microsoft Windows Vista Treiber und verwandte Informationen. ASRock-Website http://www.asrock.com ASRock P4VM900-SATA2 Motherboard...
  • Seite 46 VGA-Karte auf 64 MB. Wenn Sie den integrierten VGA-Chip mit einer Gesamtsystemspeichergröße von 512MB verwenden und das Windows ® Vista Basic Logo vorlegen möchten, dann stellen Sie bitte die Größe des dem integrierten VGA-Chip freizugebenden Arbeitsspeichers auf 128MB oder noch mehr ein. ASRock P4VM900-SATA2 Motherboard...
  • Seite 47: Installation

    2. Installation 2. Installation P4VM900-SATA2 ist ein Mikro ATX Formfaktor (9.6-in x 8.0-in, 24.4 cm x 20.3 cm) Hauptplatine. Bevor Sie die Hauptplatine installieren, lesen Sie die Konfiguration des Gehäuses und vergewissern Sie sich, ob die Hauptplatine in ihm passt.
  • Seite 48 Kühlwinkel fest zusammen befestigt und in gutem Kontakt miteinanderen sind. Danach verbinden Sie die CPU Ventilator mit der CPU_Ventilator Anschlußstück (CPU_FAN1, siehe S.2 No. 27). Für die korrekte Installation bitte lesen Sie die Gebrauchanweisung der CPU Ventilator und der Kühlwinkel. ASRock P4VM900-SATA2 Motherboard...
  • Seite 49 2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) 2.3 Installation der Speichermodule (DIMM) Das P4VM900-SATA2-Motherboard hat zwei 184-pol. DDR- (Double Data Rate) DIMM- Steckplätze. Achten Sie darauf, das Netzteil abzustecken, bevor Sie DIMMs oder Systemkomponenten hinzufügen oder entfernen.
  • Seite 50: Einbau Einer Erweiterungskarte

    Slots): Slots): Slots): Slots): Es stehen 3 PCI-, 1 HDMR-, und 1 PCI Express-Slot auf dem P4VM900-SATA2 Motherboard zur Verfügung. PCI-Slots: PCI-Slots werden zur Installation von Erweiterungskarten mit dem 32bit PCI-Interface genutzt. HDMR-Slot: Der HDMR-Steckplatz dient zur Aufnahme der HDMR-Karte mit v.92 Modem-Funktionalität.
  • Seite 51: Einstellung Der Jumper

    Systeminformationen wie Systemkennwort, Datum, Zeit und System-Setupeinstellungen. Um die Einstellungen zu löschen und Default-Werte wiederherzustellen, schalten Sie den Computer aus, ziehen Sie den Netzstecker und überbrücken Sie 2-pin von CLRCMOS1 mithilfe des Jumpers für 5 Sekunden. ASRock P4VM900-SATA2 Motherboard...
  • Seite 52: Integrierte Header Und Anschlüsse

    Diese beiden Serial ATA (SATA II) -Anschlüsse (SATAII_1: siehe S.2, Nr. 13) unterstützen interne SATA- (SATAII_2: siehe S.2, Nr. 14) oder SATA II-Festplatten. Die SA T AII_2 SA T AII_1 aktuelle SATAII-Schnittstelle ermöglicht eine Datenübertragungsrate bis 3,0 Gb/s. ASRock P4VM900-SATA2 Motherboard...
  • Seite 53 Anschließen des Front Panel USB Kabels an USB4_5 header benutzen, dann sind die USBAnschlüsse auf dem I/O Panel nicht imstande, zu funktionieren. Anschluss für Dieser Anschluss unterstützt Infrarot-Modul einen optionalen Infrarot- Sender/Empfänger. (5-Pin IR1) (siehe S.2 - Nr. 6) ASRock P4VM900-SATA2 Motherboard...
  • Seite 54 , wählen Sie “Erkennung der Frontleistenbuchse deaktivieren” und speichern Sie die Änderung durch Klicken auf “OK”. ® Für Windows Vista Betriebssystem: Die Rechtoberseite „Dateiordner“ Ikone anklicken , „Schalttafel Buchse Entdeckung sperren“ wählen und die Änderung speichern, indem Sie „OKAY“ klicken. ASRock P4VM900-SATA2 Motherboard...
  • Seite 55 (siehe S.2 - Nr. 2) damit ausreichend Strom geliefert werden kann. Andernfalls reicht der Strom nicht aus, das System zu starten. Bitte installieren Sie den Kühlkörper und den CPU-Lüfter, bevor Sie den ATX 12-V-Anschluss installieren. Andernfalls könnten dauerhafte Schäden auftreten! ASRock P4VM900-SATA2 Motherboard...
  • Seite 56 DOS ausführbares Dienstprogramm. Auf der Internetseite von HITACHI finden Sie entsprechende Details: http://www.hitachigst.com/hdd/support/download.htm Die Beispiele oben dienen lediglich Ihrer Referenz. Die Steckbrückeneinstellungen können bei unterschiedlichen SATA II Festplatten verschiedener Hersteller abweichen. Aktualisierungen und ergänzende Informationen finden Sie auf der Internetseite des Herstellers. ASRock P4VM900-SATA2 Motherboard...
  • Seite 57 AII- Festplatten Festplatten Festplatten Festplatten Festplatten Das Motherboard P4VM900-SATA2 unterstützt Hot-Plug-Funktion für SATA / SATAII- Geräte. HINWEIS Was ist die Hot-Plug-Funktion? Wenn SATA / SATAII-Festplatten NICHT für RAID-Konfiguration eingestellt sind, werden sie “Hot-Plug” genannt: Ein Einfügen und Entfernen von SATA / SATAII-Festplatten, während das System in Betrieb ist und einwandfrei läuft.
  • Seite 58 Setzen Sie die Option “SATA Operation Mode” (SATA-Betriebsmodus) auf [non-RAID]. ® SCHRITT 2: Installieren Sie Windows 2000 / XP / Vista in Ihrem System. ® Sie das Betriebssystem Windows 2000 / XP / Vista auf Ihrem System installieren. ASRock P4VM900-SATA2 Motherboard...
  • Seite 59 PCI / PCIE-Bus in einem fixierten Modus, so dass der FSB in einer stabileren Übertaktungsumgebung arbeiten kann. Beziehen Sie sich auf die Warnung vor möglichen Overclocking-Risiken auf Seite 44, bevor Sie die Untied Overclocking-Technologie anwenden. ASRock P4VM900-SATA2 Motherboard...
  • Seite 60 File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert. ASRock P4VM900-SATA2 Motherboard...
  • Seite 61 1. Introduction 1. Introduction Merci pour votre achat d’une carte mère ASRock P4VM900-SATA2, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des perfor- mances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité...
  • Seite 62: Spécifications

    - Max. 4Go (voir ATTENTION 3) L’accélérateur - Contrôle direct de la fréquence CPU (voir ATTENTION 4) hybride - ASRock U-COP (voir ATTENTION 5) - Garde d’échec au démarrage (B.F.G.) Slot d’extension - 1 x slot PCI Express x16 - 3 x slots PCI...
  • Seite 63 Si vous le faites, c’est à vos frais et vos propres risques. Nous ne sommes pas responsables des dommages possibles causés par l’overclocking. ASRock P4VM900-SATA2 Motherboard...
  • Seite 64 à jour notre site Web à l’avenir. Veuillez visite notre site Web pour obtenir le pilote ® ® Microsoft Windows Vista et les informations liées. Site Web ASRock http://www.asrock.com ASRock P4VM900-SATA2 Motherboard...
  • Seite 65 à 512MB et que vous envisagez de vous soumettre au logo Windows ® Vista Basic, veuillez régler la taille de la mémoire partagée du VGA intégrée sur 128MB ou plus. ASRock P4VM900-SATA2 Motherboard...
  • Seite 66 2. Installation 2. Installation P4VM900-SATA2 est une carte mère micro de facteur de forme d’ATX (9.6-po x 8.0- po, 24.4 cm x 20.3 cm ). Avant que vous installiez la carte mère, étudiez la configura- tion de votre châssis pour s’assurer que les ajustements de carte mère dans elle.
  • Seite 67 Reliez alors le ventilateur de CPU au connecteur de CPU_FAN (CPU_FAN1, voient p.2 No. 27). Pour l’installation appropriée, veuillez référer-vous aux manuels d’instruction du ventilateur de CPU et du radiateur. ASRock P4VM900-SATA2 Motherboard...
  • Seite 68 2.3 Installation des modules mémoire (DIMM) 2.3 Installation des modules mémoire (DIMM) 2.3 Installation des modules mémoire (DIMM) La carte mère P4VM900-SATA2 propose deux emplacements DIMM DDR (Double Débit de données) à 184 broches. Ayez bien le soin de débrancher l’alimentation avant d’ajouter ou de retirer des modules DIMM ou les composants du système.
  • Seite 69 Gardez la vis pour un usage ultérieur. Etape 3. Alignez la carte sur le connecteur et appuyez fermement jusqu’à l’insertion complète de la carte dans son emplacement. Etape 4. Fixez la carte sur le châssis à l’aide d’une vis. ASRock P4VM900-SATA2 Motherboard...
  • Seite 70 Pour effacer et réinitialiser les paramètres du système à leur configuration par défaut, veuillez mettre l’ordinateur hors tension et débrancher le cordon d’alimentation, puis utilisez un capuchon de cavalier pour court-circuiter la 2 broches sur CLRCMOS1 pendant 5 secondes. ASRock P4VM900-SATA2 Motherboard...
  • Seite 71 (SATAII_2: voir p.2 No. 14) SATA ou SATAII pour les SA T AII_2 SA T AII_1 dispositifs de stockage interne. L’interface SATAII actuelle permet des taux transferts de données pouvant aller jusqu’à 3,0 Go/s. ASRock P4VM900-SATA2 Motherboard...
  • Seite 72 à l’en-tête USB4_5, les ports 45 d’USB sur le panneau de I /O ne pourront pas fonctionner. Connecteur module Ce connecteur gère un module infrarouge en option d’émission/réception sans fil infrarouge. (IR1 br. 5) (voir p.2 No. 6) ASRock P4VM900-SATA2 Motherboard...
  • Seite 73 » et sauvegarder les changements en cliquant sur « OK ». Pour Windows ® Vista Cliquer droit “Fichier” icone , selectionner” la detection incapable de jack de panel d’avant “ et sauvegarder le changement par cliquer”ok”. ASRock P4VM900-SATA2 Motherboard...
  • Seite 74 Faute de quoi, il ne sera pas possible de mettre sous tension. Veuillez installer le dissipateur thermique et le ventilateur à processeur avant d’installer le connecteur ATX 12V; vous risquez sinon de causer des dommages irréversibles! ASRock P4VM900-SATA2 Motherboard...
  • Seite 75 Pour les différents produits disques durs SATAIII provenant de différents vendeurs, les méthodes de mise en place de cavaliers ne sont pas les mêmes. Veuillez visiter le site Internet des vendeurs pour les mises à jours. ASRock P4VM900-SATA2 Motherboard...
  • Seite 76 A / SAT T T T T AII Durs SA Durs SA A / SA La Carte Mère P4VM900-SATA2 supporte la fonction “Hot Plug” pour les périphériques SATA / SATAII. REMARQUE Qu’est-ce que la fonction « Hot Plug »? Si les disques durs SATA / SATAII ne sont pas en configuration RAID, l’action d’insérer et de retirer des disques SATA / SATAII alors que le...
  • Seite 77 B. Réglez l’option “SATA Operation Mode”« Mode de fonctionnement SATA » sur [non-RAID]. ETAPE 2: Installer le système d’exploitation Windows ® 2000 / XP / Vista votre système. ® Vous pouvez démarrer l’installation du SE Windows 2000 / XP / Vista sur votre système. ASRock P4VM900-SATA2 Motherboard...
  • Seite 78 CD technique, insérez-le dans le lecteur de CD-ROM. Le Menu principal s’affiche automatiquement si “AUTORUN” est activé dans votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier “ASSETUP. EXE” dans le dossier BIN et double-cliquez dessus pour afficher les menus. ASRock P4VM900-SATA2 Motherboard...
  • Seite 79: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock P4VM900-SATA2, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Seite 80 - Supporta DDR400/333 - Max. 4GB (vedi ATTENZIONE 3) Booster ibrido - Stepless control per frequenza del processore (vedi ATTENZIONE 4) - ASRock U-COP (vedi ATTENZIONE 5) - Boot Failure Guard (B.F.G.) Slot di - 1 x slot PCI Express x16 espansione...
  • Seite 81 La procedura è eseguita a proprio rischio ed a proprie spese. Noi non possiamo essere ritenuti responsabili per possibili danni provocati dall’overclocking. ASRock P4VM900-SATA2 Motherboard...
  • Seite 82 è in continuo aggiornamento. Fintanto che saremo in possesso del driver più recente, terremo aggiornata la versione sul nostro sito. Visitare il nostro sito per il driver Microsoft ® Windows ® Vista e relative informazioni. Sito ASRock http://www.asrock.com ASRock P4VM900-SATA2 Motherboard...
  • Seite 83 VGA integrata a 64MB. Se si usa una scheda VGA integrata con dimensioni totali di memoria superiori a 512MB, e si pianifica di sottoporre il logo Windows ® Vista Basic, regolare le dimensioni della memoria condivisa della scheda VGA integrata su 128MB o più. ASRock P4VM900-SATA2 Motherboard...
  • Seite 84: Installazione

    2. Installazione P4VM900-SATA2 e‘ una scheda madre fattore forma Micro ATX (9.6-in x 8.0-in, 24.4 cm x 20.3 cm). Prima di effettuare l‘installazione della scheda madre, studiare la configurazione del Vostro schema al fine di garantire che la scheda madre sia perfettamente insertita nel sistema.
  • Seite 85 Quindi collegare la ventola del CPU al connettore del CPU_FAN (CPU_FAN1, vedere pg.2 N. 27). Al fine di eseguire un‘installazione corretta, prego fare riferimento al manuale d‘istruzioni della ventola del CPU e del dissipatore. ASRock P4VM900-SATA2 Motherboard...
  • Seite 86 2 . 3 Installazione dei moduli di memoria (DIMM) Installazione dei moduli di memoria (DIMM) La motherboard P4VM900-SATA2 mette a disposizione due slot DIMM DDR (Double Data Rate) da 184 pin. Scollegare l’alimentazione elettrica prima di aggiungere o rimuovere i DIMM o altri componenti del sistema.
  • Seite 87 Rimuovere i ganci sullo slot che si intende utilizzare. Tenere a portata di mano le viti. Step 3. Allineare il connettore della scheda con lo slot e premere con decisione finché la scheda è completamente inserita nello slot. Step 4. Agganciare la scheda allo chassis con le viti. ASRock P4VM900-SATA2 Motherboard...
  • Seite 88 Per azzerare e ripristinare i parametri di sistema all’impostazione predefinita, spegnere il computer e scollegare il cavo d’alimentazione: utilizzare un cappuccio jumper per cortocircuitare i 2 pin su CLRCMOS1 per 5 secondi. ASRock P4VM900-SATA2 Motherboard...
  • Seite 89 HD SATA o SATAII per le SA T AII_2 SA T AII_1 funzioni di archiviazione interna. ATAII (SATAII) suppo- rtano cavi SATAII per dispositivi di memoria interni. L’interfaccia SATAII attuale permette velocità di trasferimento dati fino a 3.0 Gb/s. ASRock P4VM900-SATA2 Motherboard...
  • Seite 90 USB sul pannello frontale e l‘header USB4_5, leporte USB 45 sul pannello I/O non saranno funzionanti. Connettore modulo Questo connettore supporta infrarossi una wireless opzionale che trasmette e riceve moduli (5-pin IR1) infrarossi. (vedi p.2 Nr. 6) ASRock P4VM900-SATA2 Motherboard...
  • Seite 91 “Disattiva rilevazione presa pannello anteriore” e salvare la modifica facendo clic su “OK”. ® Per Windows Vista Cliccare sull‘icona in alto a destra “Folder” (“Cartella”) selezionare “Disable front panel jack detection” “Disabilitare individuazione presa pannello frontale”) e cliccare “OK” per memorizzare. ASRock P4VM900-SATA2 Motherboard...
  • Seite 92 (vedi p.2 Nr. 2) in modo che possa fornire energia sufficiente. In caso contrario l’unità non si avvia. Installare il dispersore di calore e la ventolina CPU prima di installare il connettore ATX 12V; diversamente si provocheranno danni irreparabili! ASRock P4VM900-SATA2 Motherboard...
  • Seite 93 Gli esempi di cui sopra sono solo per riferimento. Per dischi rigidi SATAII di diversi produttori, i metodi di impostazione dei pin del jumper possono non essere gli stessi. Visitare i siti web dei produttori per gli aggiornamenti. ASRock P4VM900-SATA2 Motherboard...
  • Seite 94 A / SA A / SA A / SAT T T T T AII La scheda madre P4VM900-SATA2 supporta la funzione di collegamento e scambio a per i dispositivi SATA / SATAII. NOTA Che cosa è la funzione di collegamento a caldo? Se i dischi rigidi SATA / SATAII NON sono impostati per una configurazione RAID, è...
  • Seite 95 Impostare l’opzione “SATA Operation Mode” (Modalità operativa SATA) su [non-RAID]. 2° PASSO: Installazione di Windows ® 2000 / XP / Vista sul sistema. ® Si può iniziare ad installare il sistema operativo Windows 2000 / XP / Vista sistema. ASRock P4VM900-SATA2 Motherboard...
  • Seite 96 ROM. Se la funzione “AUTORUN” è attivata nel computer, apparirà automaticamente il Menù principale. Se il Menù principale non appare automaticamente, posizionarsi sul file “ASSETUP.EXE” nel CESTINO del CD di supporto e cliccare due volte per visualizzare i menù. ASRock P4VM900-SATA2 Motherboard...
  • Seite 97: Contenido De La Caja

    1. Introducción 1. Introducción Gracias por su compra de ASRock P4VM900-SATA2 placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 98 - Max. 4GB (vea ATENCIÓN 3) Amplificador - Stepless control de frecuencia de CPU (vea ATENCIÓN 4) Híbrido - ASRock U-COP (vea ATENCIÓN 5) - Protección de Falla de Inicio (B.F.G..) Ranuras de - 1 x slot PCI Express x16 Expansión...
  • Seite 99 - Taquímetros de los ventiladores del procesador y del chasis - Monitor de Voltaje: +12V, +5V, +3.3V, Vcore - En conformidad con Microsoft ® Windows ® 2000 / XP / Vista (vea ATENCIÓN 8) Certificaciones - FCC, CE, WHQL ASRock P4VM900-SATA2 Motherboard...
  • Seite 100 ® ® Web si desea obtener el controlador para Microsoft Windows Vista así como la información relacionada. Sitio Web de ASRock: http://www.asrock.com 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 ASRock P4VM900-SATA2 Motherboard...
  • Seite 101 512 MB y pretende presentar el logotipo de Windows ® Vista Basic, ajuste el tamaño de la memoria compartida de la tarjeta VGA a 128 MB como mínimo. 1 0 1 1 0 1 1 0 1 1 0 1 1 0 1 ASRock P4VM900-SATA2 Motherboard...
  • Seite 102: Instalación

    2. Instalación 2. Instalación P4VM900-SATA2 es una placa matriz del factor de la forma de Micro ATX (9.6-in x 8.0- in, 24.4 cm x 20.3 cm). Antes de instalar la placa matriz, por vafor estudie la configuración de su chasis para asegurarse de que la placa matriz se convenga con ella.
  • Seite 103 CPU_FAN (CPU_FAN1, consulte a p.2 de No. 27). Para la instalación apropiada, por favor refiera amablemente a los manuales de instrucción del ventilador de CPU y del disipador de calor. 1 0 3 1 0 3 1 0 3 1 0 3 1 0 3 ASRock P4VM900-SATA2 Motherboard...
  • Seite 104 2 . 3 Instalación de Memoria Instalación de Memoria La placa base P4VM900-SATA2 proporciona dos zócalos DIMM DDR (Doble velocidad de datos) de 184 contactos Asegúrese de desconectar la fuente de alimentación antes de añadir o retirar módulos DIMM o componentes del sistema.
  • Seite 105 Paso 3. Encaje el conector de la tarjeta a la slot. Empuje firmemente la tarjeta en la slot. Paso 4. Asegure la tarjeta con tornillos. 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock P4VM900-SATA2 Motherboard...
  • Seite 106 A continuación, utilice una cubierta de jumper para aislar las agujas 2 pins en CLRCMOS1 du- rante 5 segundos. 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock P4VM900-SATA2 Motherboard...
  • Seite 107 Ambos extremos del cable serie ATA (SATA) pueden conectarse al disco duro SATA / SATAII o la (Opcional) conexión de la placa base. 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock P4VM900-SATA2 Motherboard...
  • Seite 108 Permite recepción de input audio de fuente sónica como CD- (4-pin CD1) ROM, DVD-ROM, TV tuner, o (CD1: vea p. 2, N. 22) tarjeta MPEG. 1 0 8 1 0 8 1 0 8 1 0 8 1 0 8 ASRock P4VM900-SATA2 Motherboard...
  • Seite 109 “OK”. Conector del panel del systema Este conector acomoda varias funciones de panel frontal del (9-pin PANEL1) systema. (ver p.2, N. 15) 1 0 9 1 0 9 1 0 9 1 0 9 1 0 9 ASRock P4VM900-SATA2 Motherboard...
  • Seite 110 Instale el disipador y el ventilador de la CPU antes de instalar el conector ATX 12V; de lo contrario puede causar daños permanentes. 1 1 0 1 1 0 1 1 0 1 1 0 1 1 0 ASRock P4VM900-SATA2 Motherboard...
  • Seite 111 Por favor visite el sitio Web de los proveedores para obtener las actualizaciones. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ASRock P4VM900-SATA2 Motherboard...
  • Seite 112 A / SAT T T T T AII HDDs SA HDDs SA A / SA La placa base P4VM900-SATA2 soporta la función de conexión en caliente para Dispositivos SATA / SATAII. NOTA ¿Qué es la función de conexión en caliente? Si los HDDs SATA / SATAII no están fijados para su configuración...
  • Seite 113 2000 / XP / Vista en su sistema. ® Puede comenzar a instalar Windows 2000 / XP / Vista en su sistema. 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock P4VM900-SATA2 Motherboard...
  • Seite 114 Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo “ASSETUP.EXE” para iniciar la instalación. 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock P4VM900-SATA2 Motherboard...

Inhaltsverzeichnis