Herunterladen Diese Seite drucken

Bellelli Giotto Bedienungsanleitung Seite 11

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
Important
Read the instructions carefully before using this
child seat. Follow them to the letter and keep
them for future reference. Refer to the retailer
for further information.
Help us improve our products by completing the
questionnaire on our web site: www.bellelli.com.
Notice
1 - This is a "Universal" child restraint. It is
approved to Regulation No. 44, amendments
series 04, for general use in vehicles and it
will fit most, but not all, car seats.
2 - A correct fit is likely if the vehicle
manufacturer has declared in the vehicle
handbook that the vehicle is capable of
accepting a "Universal" child restraint for the
age group in question.
3 - This child restraint has been classified as
"Universal" under more stringent conditions
than those applied to earlier designs that do
not carry this notice.
4 - This child restraint is only suitable if the
approved vehicles are fitted with 3 point
static/retractor seat belts approved to
UN/ECE Regulation No. 16 or other
equivalent standards.
5 - If in doubt, consult either the child restraint
manufacturer or the retailer.
Important information
Safety
Warning: Incorrect fitting or use of the child seat
may seriously jeopardise the safety of the child.
Therefore, ensure that you:
follow the user instructions meticulously.
do not tamper with or modify the child seat
in any way.
Position the child seat so that it cannot be
damaged by closing the car door, adjusting the
seats or similar operations.
Do not leave the child unattended in the child seat.
Do not leave the child seat in the car when it is
parked in the sun: plastic parts of the child seat
may become very hot.
Make sure that bags or other objects are
fastened down in the car. The driver and all
passengers must wear seat belts.
Secure the child seat to the car seat with the car
seat belt even when the seat is not in use.
Periodically check the condition of the child
seat. Replace the seat if it shows signs of
breakage or wear and tear.
Do not use the child seat if any parts are broken
or missing.
Use exclusively original spare parts.
Beware of objects, such as toys, in the child's
pockets which - if they come between the
harness and the child's body - may cause injury
in the event of an accident. To avoid this risk
ensure that your child's pockets are empty. This
precaution also applies to adults.
Children are often lively and restless: patiently
explain to the child the importance of remaining
seated with the harness fastened for the entire
journey. This will help to ensure the desired
level of safety.
In the event of an accident
All passengers must know how to take the child
out of the seat.
The child seat must be discarded and replaced
after an accident: it may have suffered damage
that is not visible by means of an external
inspection.
Comfort
Do not pull the harness too tightly across the
child's body.
When the child seat is used on the rear seat of
the car, make sure there is enough room for the
child's feet. Move the front seat forward slightly
if necessary.
Take frequent breaks on long journeys so the
child has a chance to move about.
Fitting the child seat
Identify the components of the child seat before
using it. Consult figure 1 carefully.
Support the seat on a flat surface. Push the
backrest down to insert it into the guides located
in the rear part of the seat. Check that it is fully
engaged. The metal yoke must remain behind
the backrest (fig 2).
A. headrest
B. belt guide
C. backrest
D. seat
E. adjuster
F. adjuster strap
G. buckle
H. harness padding
I.
harness straps
9
EN

Werbung

loading