Using The Telephony Function; Synchronising The Phonebook; Commands; Receiving A Calll - Parrot MKi9000 Bedienungsanleitung

Using the telephony function

Before using your Parrot MKi9000 telephony function, you
first have to connect both devices.
►
Refer to the Pairing a phone to the Parrot MKi9000
section for more information.

Commands

Button
Functions
Short press :
- Answer an incoming call
- Launch voice recognition mode
- Transfer the call on the phone
(discreet mode)
- Exit discreet mode
- Answer a second incoming call /
toggle between two calls
Long press : Call the last dialled number
- Reject an incoming call (or a second
incoming call)
- Hang up
Adjust the communication volume
Short press : Use the DTMF function
(to manage interactive vocal servers)
Mute / unmute the microphone (secret mode)
12

Synchronising the phonebook

With some Bluetooth phones, the phonebook is automatically
synchronized in the kit's memory. Only the contacts stored in
the phone memory are synchronized.
If your phone doesn't support automatic synchronization,
you can also use the Object Push function of your phone to
send contacts from your mobile to the car kit via Bluetooth.
To do so:
1. Press the jog wheel and select
contacts.
> The kit says « Waiting for contact ».
2. Refer to your phones' user guide for more information
about sending contacts via Object Push.
Receiving a call
An incoming call is indicated by a ringtone.
The name of the caller is announced if his details
are known by the kit.
• If you want to answer the call, press the green button.
Then press the red button to end the call.
• If you want to refuse this call, press the red button.
• If the magic words are activated, you can use the voice
recognition feature to pick up and reject a call.
► Refer to the Using the magic words section.
Settings > Receive