Access Codes - Hach LANGE si628 P Bedienungsanleitung

4. Operation

4.11. Access codes

The code 100 is for access to the calibration and programming of the instrument.
There are codes with other functions:
Code Action
401 Modification of the relay lag of the limits relays activation and deactivation.
Standard value: 2s. Programmable values: 0 to 99 s
413 Modification of the time for alarm activation when there is out of range reading.
Standard value: 60 s. Programmable values: 0 to 99 s/min/h
473 Modification of the delay time activation of the analogical output 4 to 20 mA after quitting Hold.
Standard value: 10 s. Programmable values: 0 to 99 s
497 Possibility to adjust the temperature for minimizing the effect of long cables.
22
si628 P_HACH_LANGE_Ed.0510.indd ANG:22 si628 P_HACH_LANGE_Ed.0510.indd ANG:22 20/5/10 11:24:26 20/5/10 11:24:26