Adjustment Menu Contents - iiyama Vision Master 1451 Bedienungsanleitung

ADJUSTMENT MENU CONTENTS

Menu Problem / Option Button to Press
Too dull
Too intense
Contrast*
Too dark
Too bright
Brightness*
Too far to the
left
Too far to the
H-Center
right
Too small
Too large
H-Size
Too low
Too high
V-Center
Too small
Too large
V-Size
Too small
Too large
Zoom
To correct
distortion
Pincushion
To correct
distortion
Trapezoid
To correct
distortion
Pin Balance
To correct
distortion
Parallelogram
To correct
tilt
Rotation
*
Contrast:
Direct
Brightness: Press the Brightness / – Button.
Menu Problem / Option
6500 6500K: Warmer white
9300 9300K: Normal white
(Color
NOTE The setting by User Color function is
Temperature)
changed to 6500K or 9300K when you perform
in K: Kelvin
this operation.
Red/Blue
User Color
Every time the monitor is switched
on, the monitor is automatically
degaussed. But occasionally the colors change
Degauss
when moving or swiveling the monitor. In this
case, first try the tilt adjustment. If the problem
persists, select Degauss.
NOTE
Degauss should not be repeated
continuously. Wait at least 30 minutes between
degaussing operations.While degaussing, the
picture shakes and a low sound occurs but this
does not indicate a problem, it is normal.
H-Moire Reduce
V-Moire Reduce
Moire Reduce
Moire is the result of interference
NOTE
between the phosphor layout and the video
signal. In some case, you may find the moire
very noticeable. Press OSD menu to enter in
the moire reduce setting. Please adjust the level
to the optimum condition. Too high of a setting
will cause the picture to shake.
Factory-preset data is restored.
NOTE Performing this operation resets any
Recall
adjustment data made by the user to the
factory-preset frequencies. The following
settings remain unchanged.
Close OSD window.
EXIT
NOTE Exit Button also can be used.
Exit
Press the Contrast / + Button.
Button to Press
MENU
Color Moire
OPERATING THE MONITOR
MENU
MENU
MENU
MENU
9