Echo PB-2520 Bedienungsanleitung Seite 15

1. Stop switch "SLIDE SWITCH" mounted on top of handle.
Push forward to start and run. Slide back to stop.
2. Spark plug Provides spark to ignite fuel mixture.
3. Air cleaner Contains replaceable air filter element.
4. Fuel tank Contains fuel and fuel filter.
5. Fuel tank cap Covers and seals fuel tank.
6. Starter handle Pull recoil handle slowly until recoil starter
engages, then quickly and firmly. When engine starts,
return handle slowly. DO NOT let handle snap back or
damage to unit will occur.
7. Choke Choke is located on top of the air cleaner. Move
choke lever to position to close choke for cold start-
ing. Move choke lever to
8. Purge bulb Pumping purge bulb before starting engine
draws fresh fuel from the fuel tank, purging air from the
carburettor. Pump purge bulb until fuel is visible and
flows freely in the clear fuel tank return line. Pump purge
bulb an additional 4 or 5 times.
position to open choke.
Description
9. Spark arrestor - Catalytic silencer / Silencer The silenc-
er or catalytic silencer controls exhaust noise and emis-
sion. The spark arrestor screen prevents hot, glowing
particles of carbon from leaving the silencer. Keep ex-
haust area clear of flammable debris.
10. Serial number label Lists model number and serial
number of unit.
11. Blower pipes Exclusive positive locking system.
12. Throttle position lever (Throttle setting device) Pull
back to increase engine speed. Friction washers main-
tain throttle lever setting.
13. Throttle trigger Spring loaded to return to idle when re-
leased. During acceleration, press trigger gradually for
best operating technique.
14. Housing cover Covers blade area.
13
Description