urmet 1098/800 Kurzanleitung Seite 27

IMPORTANT NOTE
- Besides P2P mode, it is also possible to remote display the NVR on the smartphone with DDNS Urmet
service. To do this, the router must be set for port opening and forwarding. For further details about
DDNS Urmet service see the NVR manual (see QR code printed on the Wi-Fi kit quick guide).
- To display the NVR in LAN network, it is possible to add it to the app by using its IP address. In order to
know the NVR local IP address see the menu page "Menu" -> "Network" of the NVR.
3. Select the icon
reading the QR code. If absent, install the QR code reader application
in the smartphone, then scan the QR code on the NVR case.
4. Fill in the field "Password" by
entering the NVR password
(default: 00000000), then
select "Save" and wait about
10 seconds until the NVR LIVE
video is automatically loaded.
27
NVR
near the field "Address" to enter the NVR ID
EN