THOMSON DSC 525W Bedienungsanleitung Seite 43

MOTORISED 1080P IP WIFI CAMERA
1 2 3 4
6 7 8 9
1 Vertical image inversion
Anti-flicker: if the image lighting is artificial,
2
select 50 Hz. If the light source is natural,
select "extérieur [outdoor]".
Quick quality and frame rate selection
3
Horizontal image inversion
4
Tab for access to the camera configuration
5
Brightness, contrast and colour settings
6
Manual activation of night vision
7
Activate computer microphone if present: lets
8
you speak through the camera's speaker
Activate the camera microphone: lets you
9
listen to the camera surroundings
Take a snapshot of the camera image on
10
the computer
Take a video of the camera image on the
11
computer
Display the image in full screen (double-
12
click to revert)
You can access your camera settings by clicking on
"Réglages [settings]" at the top of the window:
5
10 11
D - CONFIGURATION AND USE
Here you will find the same functions as those
accessible from the ThomView software. Refer to the
12
previous paragraph to see these functions.
NOTE: if you use your browser to switch your camera
from a wired to a wireless network, the connection
will be lost because the camera IP address will
change. You must restart the IP Camera Search Tool
to detect the camera again.
www.thomsonsecurity.eu
EN
EN
19