Lenovo ThinkCentre M700 Hardwarebedienungsanleitung Seite 98

• If your computer comes with the VESA mount bracket installed, and you are installing the smaller vertical
stand, ensure that you remove the VESA mount bracket before you install the vertical stand. To remove
the VESA mount bracket, see "Replacing the VESA mount bracket" on page 91.
To replace the vertical stand, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Lift the computer to remove it from the vertical stand.
Figure 12. Removing the computer from the vertical stand
90
ThinkCentre M700 and M900 Hardware Maintenance Manual