Lenovo ThinkCentre M700 Hardwarebedienungsanleitung Seite 123

4. Pull the right side of the internal speaker holder as shown, to remove it from the heat sink.
Figure 46. Removing the internal speaker holder
5. Position the new internal speaker holder on the heat sink so that the screw holes in the holder align
with the corresponding screws of the heat sink. Then, push the internal speaker holder until it snaps
into position.
Figure 47. Installing the internal speaker holder
6. Install the internal speaker. See "Replacing the internal speaker" on page 112.
7. Connect the cable of the new internal speaker to the internal speaker connector on the system board.
See "Parts on the system board" on page 34.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 133.
.
Chapter 9 Installing or replacing hardware
115