Machine Operation; Recommendations And Tips - ATLANT 50Y88 Gebrauchsanweisung

should not be bent or pinched.
After connecting the Machine to water supply and sewerage, check the tightness of the filling hose
connections: the connection points should be dry.

4 MACHINE OPERATION

FIRST WASHING
Every Machine has been tested by the manufacturer, therefore, a little amount of water may remain in
the Machine. To clean the Machine from inside and remove the water that might remain after tests, perform
the fist washing cycle without any items.
Make your first washing by setting the Wash Program Selector Knob to the mark «Cotton 90 ºC».
ATTENTION! For the first washing, add 1/2 of the recommended dose of washing powder (dete-
rgent) into compartment 2 of the dispenser drawer (Fig. 14), making account of the manufacturer's
guidelines as to the maximum items loading.
PREPARATION AND LOADING OF ITEMS
Prior to start washing:
- sort out the items, having separated the coloured ones from the white ones;
- distribute the items according to the fabric care labels;
- check that the pockets of your items of clothes be empty, the damaged and torn parts be repaired,
and zippers, belts, buckles and hooks be closed or locked, and all the hard-removable spots be removed
in advance;
- be sure to shake all the sand out of the clothes (pockets, cuffs);
- turn the items with applications attached inside out.
ATTENTION! Penetration into the Machine of metal objects (coins, clips) together with clothes
may be a cause of damage of the rubber gasket and plastic drum of the Machine.
Prior to washing, put small items (socks, handkerchiefs, etc.) and delicate clothes (thin tights, stockings,
etc.) into a special net or a pillowcase.
It is recommended to wash uplifts (bras) with plastic inserts (which are fit for machine-washing) in
a special bag, since inserts may get into the Machine interior through drum openings and damage the
mechanisms.
Examine the drum for absence of foreign objects and occasional presence of domestic animals
(pets).
Load your clothes items into the drum. For better results of washing and spinning, it is recommended
to wash big and small items together.
ATTENTION! At non-uniform distribution of items in the drum, the spinning speed will drop
automatically, or no spinning will take place (it would not switch on).
NEVER load the machine only with the items made of fabrics, which absorb a lot of water (terry (Turkish)
towels, gowns, mats, etc.), to avoid overloading.
ATTENTION! Close the door of the Machine until you hear a clear click of the lock (anti-closing blo-
cking should be removed). The items should not be pinched between the door and the sealing gasket.
OPEN
CLOSED
MIN 60 CM
MAX 90 CM
Figure 10
8
Figure 11 Figure 12
ORDER OF OPERATION
Check for correct installation of the filling and draining hoses.
If the Machine was not in use for a long time, drain off the stag-
nant water by unscrewing the nut and disconnecting the hose from
the water supply tap. Connect the filing hose.
Open the water supply tap.
Load the respective compartments of the drawer with the washi-
ng powder intended for automatic washers, and any special treatment
substances. Close the drawer.
Insert the electric power plug into the socket (receptacle) of the
electric mains.
For switching the Machine on, rotate the Wash Program Selector
Figure 13
away from its position
selected program). The display indication zones highlight the basic
program parameters
The averaged laundry time corrected by electronic system depending on the real conditions during
program operating.
If necessary, you may set optional functions, select the temperature and spinning rotation speed.
To start the Machine operation under the selected program, pres the button
illuminates on the button and sound signal is generated. The door locking device operates, and the display
starts showing the indicators of the washing program and program operations.
After the end of the last washing operation, the door blocking device will switch off – a triple sound
signal will be heard with a one-minute interval.
Upon termination of washing, set the Program Selector into the
Take the plug out of the mains socket and close the water supply tap.
Open the door and take your items out.
Move the drawer out a little and leave the door opened a little, until the internal parts of the machine
get dry. To avoid unpleasant smell from appearing in the Machine, the door should remain open till the next
laundry. It is recommended to fix the door anti-closing blocking.
ATTENTION! A drop (interruption) of electric power supply during washing does not effect further
Machine operation: once the power is resumed, the Machine will go on with the program from the
interruption moment.
PROGRAM CHANGE
To make changes in the earlier selected program, set the Wash Program Selector Knob into the mark
The Machine is switched off and the program underway is cancelled. Set the Knob to the setting of the
new program.
It is recommended to check the presence of the washing powder in the drawer, and to add it, if necessary.
If it is required to stop the Machine without changing the program (for example, to add items into the
drum), keep the button pressed for 2 seconds – until blinking of the indicator in the
a sound signal, and in about 2 minutes the door blocking device will switch off.

5 RECOMMENDATIONS AND TIPS

USE OF SYNTHETIC DETERGENTS (SDs)
The machine has a drawer for loading washing powders or detergents (Fig. 14). The drawer has three
compartment marked with figures and a symbol as follows:
1 – for pre-washing and bleaching agents;
2 – for the basic washing;
- for special treatment substances (conditioners, softeners, starchers, aromatizers, etc.).
Take for your washing the SDs, bleachers and conditioners intended for automatic washers, and take
into account the manufacturer's guidelines.
ATTENTION! In is not recommended to use gelbleachers for your washing.
Select the dosage of SDs with account of the weight of the items, their dirtiness and water hardness.
ATTENTION! SD overdosage, and use of the SDs intended for manual washing may result in exc-
and set it to the mark corresponding to the
– the indicator
mark – the Machine will switch off.
.
button and
9