Sharp SD-CX1H Bedienungsanleitung Seite 175

Listening to the playback sounds from
VCR, DVD, etc.
1
Press the AUX (DEMO) button.
2
Play the connected equipment.
3
Adjust the volume using the VOLUME buttons.

Recording on a MiniDisc (Sound synchro-
nised recording)
1
Press the AUX (DEMO) button.
2
Load a recordable MiniDisc into the MD compartment, label side
up.
3
Press the S-SYNC REC button on the remote control.
4
Play the connected equipment.


Recording will start automatically.


The recording level is the level adjusted in the previous recording. (This level can
also be adjusted whilst recording.)

Recording on a MiniDisc (Normal record-
ing)
1
Press the AUX (DEMO) button.
2
Load a recordable MiniDisc into the MD compartment, label side
up.
3
Press the REC button.
4
Play the connected equipment.
5
Press the or button to adjust the recording level.
0dB
Level meter


Maximum level should not exceed "0dB".


The recording level can be adjusted in 2dB intervals between -4dB and +10dB.


If the recording level is too low, the sound volume will be decreased. If it is too
high, the sound will be distorted.
6
Press the MD button.

Headphones


Before plugging in or unplugging the headphones, reduce the volume.


Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.


Plugging in the headphones disconnects the speakers automatically. Adjust the volume
using the VOLUME buttons.
-4dB ··· +10dB
Recording level
ENGLISH
E-52