Sleep Operation - Sharp SD-CX1H Bedienungsanleitung

Timer and Sleep Operation (continued)

Sleep operation

The radio, CD, and MiniDisc can all be turned off automatically.
1
Play back the desired sound source.
2
Press the TIMER/DELETE button.
3
Within 10 seconds, press the REC LEVEL/CURSOR
to select "SLEEP".
4
Within 10 seconds, press the ENTER button.
5
Press the REC LEVEL/CURSOR
time.
(Maximum: 2 hours - Minimum: 1 minute)
6
Press the ENTER button.
7
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.


The volume will be turned down 1 minute before the sleep operation finishes.
ENGLISH
E-49
or button
or button to specify the sleep
To confirm the remaining sleep time:
1 Press the TIMER/DELETE button whilst the sleep timer is set.
2 Within 10 seconds, press the REC LEVEL/CURSOR
"SLEEP".


The display will return to normal after approximately 10 seconds.


You can change the sleep time.


Press the ENTER button whilst the sleep remaining time is displayed (see steps 5
- 6 on the left).
To cancel the sleep operation:
The sleep timer is cancelled when the unit enters the stand-by mode.
To cancel only the sleep timer without setting the unit to the stand-by mode, proceed
as follows.
1 Press the TIMER/DELETE button whilst the sleep timer is set.
2 Within 10 seconds, press the REC LEVEL/CURSOR
"SLEEP OFF".
3 Within 10 seconds, press the ENTER button.
or button to select
Remaining sleep time
or button to select