Troubleshooting; Technical Specifications - CombiSteel 7455.0100 Gebrauchsanweisung

10 Troubleshooting

If your Creative Kitchen appliance develops a fault, please check the following table before making a call.
Fault
The appliance is not working
Bowl will not fit back in to place
The appliance is overheating
The appliance is noisy
The mixing attachment fails to
rotate properly
Cannot select gear

11 Technical Specifications

Model Voltage
PM10 /
230V 50Hz
7455.0100
PM20 /
230V 50Hz
7455.0105
PM30 /
230V 50Hz
7455.0110
Probable cause
The unit is not switched on
The Stop button is not released
(7455.0110)
Plug and lead are damaged
Fuse in the plug has blown
Power supply
The overload switch has activated
Safety Guard not closed
Appliance not in gear
Bowl not fully raised
Bowl pins or surrounding area
clogged with mix
The mixing bowl is overloaded
The appliance has been operating
for too long
Bowl or mixing attachment is not
correctly fitted
Worn bearings/damaged gears
The belt has become loose
Gearing cogs misaligned
Power Current
500W 2A
1100W 4.7A
1500W 6.5A
www.combisteel.com
Check if the unit is plugged in
correctly and switched on
Turn button clockwise to release
Call your Creative Kitchen agent
or qualified Technician
Replace the fuse
Check power supply
See overload switch information
in the Operation section of this
manual
Close Safety Guard fully
Put in gear
Ensure the bowl lever is pushed
back fully
Clean the appliance
Turn off the appliance and empty
some of the contents
Turn off the appliance and allow
to cool down for 30 minutes
Remove and refit bowl/mixing
attachment
Call your Creative Kitchen agent
or qualified Technician
Call your Creative Kitchen agent
or qualified Technician
Turn Off appliance and manually
turn the whisk attachment
slightly. Select the gear again.
Dimensions
Weight
WxDxH (mm)
485x410x635 69kg
560x540x765 99kg
620x620x1125 172kg
Action
Bowl
volume
10 L
20 L
30 L
8