Screw-In Crown - Maurice Lacroix 5040.B Gebrauchsanweisung

Screw-in crown

I (pos. 0)
Some watches – certainly those water-resistant to more than 50 meters
– have a screw-in crown : you find this information printed on the tag
that accompanies the watch. Before being able to make any adjust-
ments (change date, set time etc.) the crown has to be unscrewed.
To do so, please proceed as follows :
I turn the crown counterclockwise until it disengages from the
thread and is no longer in contact with it,
II the crown is now in pos. 1 and can be pulled out to pos. 2 or 3 for
the adjustments which are about to be made,
III to screw in the crown, return to pos. 1, push against the thread
and at the same time turn clockwise until tight (pos. 0).
II (pos. 1) (pos. 2 / 3) III
41