ripcurl OCEANTECH Handbuch Seite 3

DIGITAL TEMPERATURE WATCH
LIGHT
MODE
WATCH NAVIGATION
Press the MODE button to view ALARM, CHRONOGRAPH (stopwatch) & TIMER MODE.
-
Press LIGHT to activate EL backlight
-
In TIME MODE press START to switch between REAL TIME and DUAL TIME.
-
In TIME MODE hold START for 3 seconds to activate battery save mode. Watch display will shut off.
-
Hold any button for 2 seconds to turn watch back on.
In TIME MODE press RESET to switch between Celsius and Fahrenheit temperature display.
-
SETTING THE TIME
In TIME MODE hold SET/RESET until "seconds" begin to flash.
-
Press START/ADJUST to adjust the seconds.
-
Press MODE to shift to "minutes" Hold START/ADJUST to adjust the minutes at high speed.
-
- Press MODE to shift to HOUR, 12/24hr, YEAR, MONTH, DAY
Once setting is complete press SET/RESET to exit setting state.
-
DUAL TIME
In TIME MODE press START to switch between REAL TIME and DUAL TIME.
-
In DUAL TIME MODE hold SET/RESET until "hour" begin to flash.
-
Press START/ADJUST to adjust the hours.
-
Press MODE to shift to "minutes" Hold START/ADJUST to adjust the minutes at high speed.
-
Once setting is complete press SET/RESET to exit setting state.
-
START/ADJUST
SET/RESET
3