Philips HR 7710 Gebrauchsanweisung Seite 7

27
- Switch on selecting I in combination with W2
(fig. 27).
- Add the water via the food chute (fig. 28).
Cleaning
• Always remove the plug from the wall socket
before cleaning the motor unit.
The motor unit may be wiped with a damp
cloth.
Never immerse the motor unit in water. Never
pour water over it.
• Wash the items which have been in contact
with the food in warm soapy water immediately
after use. Do not clean in a dishwasher.
• Take care when cleaning the metal blade and
slicing disc: the cutting edges are very sharp!
• Ensure that the cutting edges do not come into
contact with hard objects as this might make
them blunt.
• Do not use scourers, abrasives, etc.
28
Fitting a different plug
This appliance is fitted with a BS 1363 13 Amp.
plug.
Should you need to replace the plug, connect the
wires as follows:
Brown wire to the Live (L) terminal of the new
plug.
Blue wire to the Neutral (N) terminal of the new
plug.
Always fit the same value of fuse as that
originally supplied with your appliance.
Only use BS 1362 approved fuses.
As a guide only: Appliances under 700 W can
have a 3 Amp. fuse (red) and all others should
have a 13 Amp. fuse (brown).
When disposing of an old plug (particularly the
moulded type which has been cut from the mains
cord) always remove the fuse as the plug could
be dangerous if ever inserted in a live socket.
7
For U.K. only: