Troubleshooting
NOTE:
Never open the casing by yourself or unauthorized persons. Please contact your nearest service
department for assistance.
Transmitter Side
Problems
There is no Audio/Video on TV
There is interference on TV
Possible Causes
Power adapter for transmitter
is not plugged in
Transmitter is not
turned on
Power for the sources is not
turned on
Signal cables for the
sources are not plugged
in properly
Signal cable for the TV is not
plugged in
TV cable is not plugged in the
correct port
TV display mode is not
selected properly
TV display mode is not
selected properly
– 47 –
Solutions
Plug in the power adapter
Turn on the transmitter
Turn on the sources
Plug in the signal cables for the
sources
Plug in the signal cable to the
TV
Plug the TV cable into the TV
port on transmitter
Adjust the TV display mode
Adjust the TV display mode