Hama AV-1200 AIR Bedienungsanleitung Seite 29

Bottom Panel
a. 2.4 GHz (video) Channel Switch
There are 4 channels available for selection. When interference in video quality occurs, you can switch to
the other channels for the best video quality possible.
Note: It is necessary for the receiver and transmitter to be on the same channel to receive video signals.
b. 433 MHz (remote control) Digital Coding Selector
There are a total of 15 different sets for selection starting from 0001 to 1111. (0000 is not included).
Note: It is necessary for the receiver and transmitter to have the same setting to allow remote control
to function properly.
Note: 433Mhz is digitally coded, mainly to prevent interference from other signals on the same
bandwidth. Furthermore, there are a total of 15 code settings, and each setting won't cause interfere to
each other. To ensure proper performance of this product, only operate equipment of input that comply
with the limits for CE EMS/EMI directive.
– 29 –