Hama AV-1200 AIR Bedienungsanleitung Seite 42

Note:
The transmitter allows COMPOSITE signals input from the DVD source, and transmit the signal to the TV 2
on the receiver. The VCR on the receiver side thus can record the DVD source programs.
Operation:
1. Press POWER key to turn on the Receiver.
2. Power on the DVD Player:
you can turn it on with its own remote controller from receiver side and select favorite programs when
the RF transmission function is ON.
3. Press the DVD key under TV 2 region on the remote (or press the TV 2 source key on the front panel)
into DVD mode .
4. Use your DVD remote controller to operate.
Record programs:
Power on the VCR / DVR with its remote controller and press REC key to record the DVD program directly.
Please note that the VCR / DVR can only record the selected program on TV2.
LED Status: The GREEN LED 2 is on.
1-4. How to select the AV source from the transmitter and record while viewing the programs on TV2?
Note:
The transmitter allows COMPOSITE signals input from the AV source, and transmit the signal to the TV 2
on the receiver.The VCR on the receiver side thus can record the AV source programs.
Operation:
1. Press POWER key to turn on the Receiver.
2. Power on the satellite receiver:
you can turn it on with its own remote controller from receiver side and select favorite programs when
the RF transmission function is ON.
3. Press the AV key under TV 2 region on the remote (or press the TV 2 source key on the front panel )
into AV mode .
4. Use your AV source remote controller to operate.
– 42 –