Hama AV-1200 AIR Bedienungsanleitung Seite 41

1-2. How to select the SAT source from the transmitter and record while viewing the program on TV2?
Note:
The transmitter allows COMPOSITE signals input from the SAT source, and transmit the signal to the TV 2
on the receiver.The VCR on the receiver side thus can record the SAT source programs.
Operation:
1. Press POWER key to turn on the Receiver.
2. Power on the satellite receiver: you can turn it on with its own remote controller from receiver side and
select favorite programs when the RF transmission function is ON.
3. Press the SAT key under TV 2 region on the remote (or press the TV 2 source key on the front panel )
into SAT mode .
4. Use your IRD remote controller to operate.
Record programs:
Power on the VCR / DVR with its remote controller and press the REC key to record the SAT programs
directly. Please note that the VCR / DVR can only record the selected SAT program on TV2.
LED Status: The GREEN LED 1 is on.
1-3. How to select the DVD source from the transmitter and record while viewing the programs on TV2?
– 41 –