Changing Battery Fuse; Changing Battery - Profoto AcuteB 600 Benutzerhandbuch

> or from being charged when not fully discharged.
The battery indicator
is updated when the generator is turned on or when
triggering a flash. If all three indicators are lit, press
the test button (8) to trigger a flash, then the battery
indicator will be updated. The environment influences
the capacity of both the generator and the battery, for
example extreme cold decreases the battery charging
capacity, for more details please read "Battery Facts".

Changing battery fuse

The 40 A fuse holder is placed on top of the battery.
Pull the fuse out. Use fuses that are recommended, for
more details please read "Technical Data". Push the
new 40 A fuse all the way into the fuse holder.

Changing battery

The battery has a cassette for rapid exchange. To release
the battery, squeeze the two safety clamps and pull the
battery out. Push the new battery all the way into the
generator, make sure the text "This side up" on the battery
is up. To properly secure the battery, make sure you hear a
"click " from each safety clamp.
CHANGING BATTERY
Release battery
This side up.
Squeeze
(10) shows the charge level and
®
PULL
Squeeze
BATTERY CHARGING
Battery
Charge
Socket
CHANGING BATTERY FUSE
CHANGING BATTERY
Insert battery
Click!
Push
For more information, visit www.profoto.com
CHARGE
40 A
15
CHARGE
40 A
®
Click!