TDS SoundMaker Bedienungsanleitung Seite 27

Operation manual
PROG (Track programming)
Press the PROGRAM button to start the track programme function.
Press the UP and DOWN buttons to select a previous or next track
until the selected track is displayed in the LCD.
Press the PROGRAM button to confirm the track programming.
Repeat steps 2 and 3 to programme any further tracks. Press the
PLAY button to start the playback in the selected programme order.
A maximum of 20 tracks can be programmed.
RANDOM
Random selects a CD track and starts the playback. At the end of this
track a new one is selected at random and played back. This process
continues until all the CD tracks have been played or the playback is
interrupted.
Press the RANDOM button to activate the random mode.
Press the button again to end the random mode.
This function is not available during track programming.
REMAIN (Remaining time)
The display shows the elapsed playback time of a track. Press the
REMAIN button to access two more time functions.
Press the REMAIN button to view the remaining playing time of the
track.
Press the REMAIN button again to view the total remaining
playback time on the CD.
This function is not available during track programming, random
selection or repeat.
INTRO (Automatic playing of all the tracks)
This function can help find a piece of music when the name of the track
cannot be retrieved. Each CD track is played for 10 seconds.
Press the INTRO button to play all the tracks for just 10 seconds.
SPACE flashes on the display.
Press the INTRO button again to release this function.
This function can only be interrupted by pressing the STOP button.
Status 11/03 27