Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ASSEMBLY
1
PVC cover
2
Flexible jumping mat
3
Tubular frame
4
Support tube
1
Remove the appliance parts to be installed. The base consists of the PVC
cover (1), jumping mat (2) and tubular frame (3).
2
Remove the transport protection caps from the screw connection.
3
Tighten the support tubes.
4
Check the end caps of the support tubes and make sure that the tension
springs do not come loose.
5
End cap
6
Clamp
7
Tension spring
EN
15
Werbung
Inhaltsverzeichnis
