Atexor P-Ex WLAN-DC-A Bedienungsanleitung Seite 34

4.2.2. Quick Setup
You can set up a connection with the P-Ex WLAN access point via a web browser. To do
this, copy the device's IP address into the browser address bar. On the first page of the con-
figuration menu you can set up the basic settings.
As per the factory settings, the P-Ex WLAN shows up as "Access Point - Bridge" at a fre-
quency of 2GHz-B/G/N. The device automatically chooses the best frequency (channel),
runs the country settings for Germany and activates data encryption. You can now change to
following settings:
Quick Set:
The Quick Set function allows you to quickly and simply switch the P-Ex WLAN between dif-
ferent operating modes. Through this, you can change all the most important operating set-
tings on one page. This function offers the following Quick Set settings: CPE, Home AP, PTP
Bridge and WISP AP.
Depending on what you select, the network name (SSID), IP address and WiFi password can
all be chosen or changed.
The factory settings of each P-Ex WLAN on delivery are selected for "Germany". The opera-
tor of the device is responsible for changing these settings to whichever other country, if
necessary. Furthermore, if you select the menu option 'Wireless', you will see the settings
have been configured according to the antennas ordered by the operator. Do not change
these!
30