Operating The P-Ex Wlan Access Point; Assembly Information For The P-Ex Wlan - Atexor P-Ex WLAN-DC-A Bedienungsanleitung

3.

Operating the P-Ex WLAN access point

3.1.

Assembly information for the P-Ex WLAN

The bottom plate has four drilled holes, one
on each corner, which facilitate securely
mounting the device. The holes have a di-
ameter of 7mm.
The PA drill holes for the earthing screws are
at the front and back edges of the P-Ex
WLAN bottom plate.
Screw terminal connection under cover
M20 x 1.5 cable screw connection for power
supply
M20 x 1.5 cable screw connection for data
stream
Ex e connector inputs:
Power supply connector via terminal block.
Data cable connector via LSA+ module
clamps. PoE input also has power connect-
or.
25