Type Numbers; Use - Atexor P-Ex WLAN-DC-A Bedienungsanleitung

Max. electromagnetic
output
Supply circuit to
LSA+ module clamps
Ex e – improved safety
Data stream circuit via
LSA+ module clamps
Ex e – improved security
Operating circuit power
Operating data stream circuit power
Data stream circuit interface (radio)
Frequency
Antennas
ANT-24-2-O.
WLAN range
(depending on the antenna)
Range for copper cat. 5
Dimensions
Weight
Atmospheric temperature
2.4.

Type numbers

P-Ex WLAN-DC-A
P-Ex WLAN-DC-S
2.5.

Use

The WLAN access point enables you to connect wireless devices to a cable network or to
connect two networks in potentially explosive environments.
The stationary device enables the transfer of electronic and electromagnetic data signals.
The P-Ex WLAN-DC-X can be deployed in the ex-environment of device category II, gas and
dust, in its aluminum housing. For use in device category I (firedamp protection), an identical
housing made of stainless steel with the corresponding permitted screw-type cable connect-
ors.
24
Only use Antennas ANT-24/58-3/5-I, ANT-24-7-I, ANT-24-8-O and
Type P-Ex WLAN-DC-A
Type P-Ex WLAN-DC-S
≤ 312 mW (25dBm)
P
em. max
X10-4 UB+
X10-5 UB+
X10-7 UB-
X10-8 UB-
X11-1 Tx+
X11-2 Tx-
X11-3 Rx+
X11-6 Rx-
+18V to +28V DC
5V (±10%) DC
Plug connector type: RP-SMA
2.4GHz / 5GHz
Indoors ≤ 300m
Outdoors ≤ 50km
100m
150mm x 270mm x 60mm (HxWxD)
3.3kg (aluminum)
4.5kg (V2A stainless steel)
-20°C to +60°C
Aluminum housing
V2A stainless steel housing