Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.7.
Color coding of the cat-cable/ethernet cable
Allocation of the cat-cable/ethernet cable and LSA+ module clamps according to EIA/TIA
T568A
PIN LSA+ module clamp
X10-4
X10-5
X10-7
X10-8
X11-1
X11-2
X11-3
X11-6
Allocation of the cat-cable/ethernet cable and LSA+ module clamps according to EIA/TIA
T568B
PIN LSA+ module clamp
X10-4
X10-5
X10-7
X10-8
X11-1
X11-2
X11-3
X11-6
4.
Configuration of the P-Ex WLAN
4.1.
Connecting to the P-Ex WLAN
To configure the P-Ex WLAN to meet the requirements it needs to be connected to a PC
network. The pin assignment for the configuration cable can be carried out on newer com-
puters or by switching in accordance with EIA/TIA T568 as well as EIA/TIA T568B (see chap-
ter 3). For older PCs and when switching, the right pin assignment needs to be configured.
4.2.
Configuration via web interface
4.2.1. Standard settings of the P-Ex WLAN
Standard IP address:
SSID:
WiFi password:
User:
password:
Please ensure that the computer is connected to the same network as the P-Ex WLAN. If this
is not possible, please see how to set up the configuration via 'Winbox' in chapter 4.3. This
allows you to set up a connection via MAC addresses.
Cat-cable color code
WHT/BLU
ORG
WHT/BRN
BRN
WHT/GRN
GRN
WHT/ORG
BLU
Cat-cable color code
BLU
WHT/BLU
WHT/BRN
BRN
WHT/ORG
ORG
WHT/GRN
GRN
192.168.100.1
P-Ex WLAN
Prim@t1on
admin
admin
100BaseT assignment
UB+
UB+
UB-
UB-
Tx+
Tx-
Rx+
Rx-
100BaseT assignment
UB+
UB+
UB-
UB-
Tx+
Tx-
Rx+
Rx-
29
Werbung
Kapitel
Inhaltsverzeichnis
