Samsung EO-SG710 Erste Schritte Seite 665

Using the Bluetooth speaker
• B luetooth uses the same frequency as some industrial, scientific, medical, and low power
products and interference may occur when making connections near these types of
products.
• S ome devices, especially those that are not tested or approved by the Bluetooth SIG, may
be incompatible with your Bluetooth speaker.
• D o not use the Bluetooth feature for illegal purposes (for example, pirating copies of files
or illegally tapping communications for commercial purposes).
Connecting via Bluetooth
Pair the Bluetooth speaker with a mobile device. Once the devices are paired, the Bluetooth
speaker will automatically connect to the mobile device whenever you turn on the Bluetooth
speaker.
1
Bluetooth speaker
seconds to enter Bluetooth pairing mode.
The indicator light will flash red and blue.
When you turn on the Bluetooth speaker for the first time, it enters Bluetooth pairing
mode.
2
Mobile device
Activate the Bluetooth feature and search for Bluetooth devices.
For more information, refer to the other device's user manual.
3
Mobile device Tap [Speaker] Bottle Design (0000) from the list of available devices.
• T he PIN for the Bluetooth speaker is the four-digit number in parenthesis displayed
on the other device's Bluetooth settings screen. The number differs depending on
the Bluetooth speaker.
• I f the Bluetooth connection fails or the other device cannot locate the Bluetooth
speaker, remove the device's information from the other device's list. Then, try to
connect again.
• T he Bluetooth connection range and sound quality may vary depending on the
connected devices.
Press and hold the Bluetooth pairing button for more than three
English (USA)
12
10