Input Key Function; Reversing Channel Setup - Carson Lynx Betriebsanleitung

e. Input Key Function
S/N Identification
1 Throttle/Tail rotor stick
Mode 2
2 Nick/roll stick
Mode 2
1 Throttle/Roll stick
Mode 1
2 Nick/Tail rotor function stick
Mode 1
3 Roll trim
4 Nick trim
5 Tail rotor trim
6 Throttle trim
7 On/Off power switch
8 Neck strap eyelet
9 Antenna
f. Reversing Channel Setup
1. Nick reverse setup (Elevator)
Hold down the ENT key for 1 second to enter the setting status.
Press the ENT key to enter the reverse setting status. Press ENT key
to choose Nick reverse (Elevator), and then hold the EXT key for
2 seconds to confirm and exit.
2. Roll reverse setup (Aileron)
Hold down the ENT key for 1 second to enter the setting status. Press
the ENT key to enter the reverse setting status. Move the arrow to
"Roll" (Aileron) by the up/down key. Press the ENT key to choose
reverse and then hold the EXT key for 2 seconds to confirm and exit.
Function
Forward and backward movement of the stick makes the helicopter ascend and descend
respectively. Left and right movement of the stick will rotate the helicopter's fuselage left/
right respectively.
Forward and backward movement of the stick makes the helicopter move forward and
backward respectively. Left and right movement of the stick makes the helicopter drift
sideways left/right respectively.
Forward and backward movement of the stick makes the helicopter ascend and descend
respectively. Left and right movement of the stick makes the helicopter drift sideways left/
right respectively.
Forward and backward movement of the stick makes the helicopter move forward and
backward respectively. Left and right movement of the stick will rotate the helicopter's
fuselage left/right respectively.
Roll trim (Aileron) subsidiary adjusts left and right drift.
Nick trim (Elevator) subsidiary adjusts forward and backward movement.
Tail rotor trim (Rudder) subsidiary adjusts left and right rotation.
Throttle trim subsidiary adjusts ascent and descent.
Pushing up the switch powers on the transmitter, pulling down switches it off.
For the attachment of a neck strap which eases the tension of your hands from holding the
transmitter.
Transmits wireless signal.
5805
Set reverse
Elevator
Aileron
Throttle
Rudder
Set sensitive X
Plane type
Expert mode No
Stick mode
5805
Set reverse
Elevator
Aileron
Throttle
Rudder
Set sensitive
Plane type
Expert mode No
Stick mode
CARSON FPV Spy Beast Lynx • 50 050 7053
HUBSAN 7.7V
-
Normal
Reverse
Normal
Normal
Helicopter
Mode 2
HUBSAN 7.7V
-
Normal
Reverse
Normal
Normal
X
Helicopter
Mode 2
GB
31